• Ships of Scale has incorportated an extra level of security when you log In. Please follow on-screen prompts to acknowledge that you are not a robot via a "Check Box" or a "Pictorial Check Box Puzzle". This is needed due to higher level of AI Activity Security.
  • SUBSCRIBE TO SHIPS IN SCALE TODAY!

    The beloved Ships in Scale Magazine is back and charting a new course for 2026!
    Discover new skills, new techniques, and new inspirations in every issue.

    NOTE THAT OUR NEXT ISSUE WILL BE July/August 2026
  • Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.

Golden Hind scratch build 1:48 (based mostly on Aeropiccola plans)

Hello shipmates~

A short update on the sheets progress. I tried somewhat darker dye on the fore main sails with pine tar (1), diluted with thinner spirit (30). This was the first try (1:30) and I am quite satisfied with the results. Not so dark, not so bright. I decided to stop any further trial for darker color as this feels the right color to me. Below are the pictures 1) comparing before and after, 2) both GH1 & GH2 with the new pine tar dyed sails. Very subtle difference in the photo, but just feels right.

IMG_3263.jpeg

IMG_3264.jpeg

Now I am starting work on the parrals. Using a 3mm x 2mm plank, initial test parrals were made as below.

IMG_3285.jpeg

IMG_3286.jpeg

IMG_3287.jpeg

Since the beads are about 2,7-2.8mm in diameter, I am adjusting the parral size to 2.5x2x8mm. Took couple of days to make enough for both main & fore main sheets of GH1 & GH2 as below.

IMG_3300.jpeg

Adding 2 more pictures with trial run on the yard.

IMG_3301.jpeg

IMG_3302.jpeg
 
Last edited:
Hi All!

Finally, running rigging can begin in earnest - starting with foresail. I decided to test and implement the martnet first. For this, I had to make shoe blocks first and below are the initial shoe blocks made for martnet.

IMG_3308.jpeg

IMG_3306.jpeg

IMG_3307.jpeg

IMG_3313.jpeg

Next, the implementation trial of martnets.

IMG_3323.jpeg

IMG_3324.jpeg

IMG_3325.jpeg

IMG_3332.jpeg

IMG_3333.jpeg

IMG_3334.jpeg

IMG_3335.jpeg
 
Last edited:
Hello shipmates~

Speeding things up a bit since last week as it has been just too long since the start of these projects. I decided to use more commercially available blocks (especially on the smaller ones) on top of my custom built blocks in order to save time.

The below are pictures of work progress on clewlines & blocks, buntlines and blocks.

IMG_3339.jpeg

IMG_3340.jpeg

IMG_3341.jpeg

IMG_3342.jpeg

IMG_3343.jpeg

IMG_3344.jpeg

Work on sheet line block installment, fiddle block on yard and installment of lifts. All look fine so far~

IMG_3349.jpeg

IMG_3355.jpeg

IMG_3356.jpeg

IMG_3357.jpeg
 
Last edited:
Back
Top