LE COMMERCE DE MARSEILLE SCALA 1/72
- Thread starter MICHELE PADOAN
- Start date
- Watchers 41
Hi Christos. I keep asking similar questions since I build my first model about 40 years ago...
and still... puzzling.
Excellent work Michele 
I like the idea that you have split the colouring down the centreline
Kind Regards
Nigel
I like the idea that you have split the colouring down the centrelineKind Regards
Nigel
- Joined
- Sep 28, 2018
- Messages
- 249
- Points
- 348
Buongiorno, ho terminato tutti i pezzi della controchiglia, controruota e bracciolo di poppa. Ora tutto è pronto per la posa delle ordinate.
- Joined
- Sep 28, 2018
- Messages
- 249
- Points
- 348
GrazieGood work Michele !
Very good work on the rabbets and keel - 
- Joined
- Sep 28, 2018
- Messages
- 249
- Points
- 348
Buonasera, ho iniziato l'ossatura, posizionato nel primo quinto d'innalzamento. Ogni ordinata è composta da 19 pezzi e più. Sarà un lavoro lungo ma è la parte che mi piace di più, vedere lo scafo, ordinata dopo ordinata, prendere forma.
- Joined
- Aug 16, 2019
- Messages
- 870
- Points
- 343
This is your Marseille in a few month
And to complete the rigging will it be like this
And to complete the rigging will it be like this
- Joined
- Sep 28, 2018
- Messages
- 249
- Points
- 348
This is your Marseille in a few month
View attachment 112301
And to complete the rigging will it be like this
View attachment 112302
Questa è la mia in scala 1/48
- Joined
- Oct 19, 2018
- Messages
- 72
- Points
- 113
Che dire Michele , l'inizio e ottimo figuriamoci ii proseguire dei lavori . Complimenti
- Joined
- Sep 28, 2018
- Messages
- 249
- Points
- 348
Grazie Giancarlo, ti seguo anch'io
- Joined
- Sep 28, 2018
- Messages
- 249
- Points
- 348
Buongiono, è ancora tutto provvisorio. I quinti saranno pareggiati solo quando saranno fissati alla ciglia e distanziati con gli zappoli e riempitori. Come noterete alcune parti dei quinti sono in legno di badì. Questi pezzi verranno poi eliminati in un secondo momento dal lato dove ci saranno solo le parti protette. Rimarranno madieri, mezzi madieri e alcuni scalmi e scalmotti perchè non mi piacciono i quinti tagliati tutti nella stessa misura.
google translation:
Buongiono, it's still all provisional. The fifths will be trimmed only when they are fixed to the eyelashes and spaced with the hoes and fillers. As you will notice some parts of the fifths are in wood of badì. These pieces will then be eliminated later on the side where only the protected parts will be. There will remain floorboards, half-floorers and some oarlocks and scalmotti because I do not like the fifths all cut to the same extent.
google translation:
Buongiono, it's still all provisional. The fifths will be trimmed only when they are fixed to the eyelashes and spaced with the hoes and fillers. As you will notice some parts of the fifths are in wood of badì. These pieces will then be eliminated later on the side where only the protected parts will be. There will remain floorboards, half-floorers and some oarlocks and scalmotti because I do not like the fifths all cut to the same extent.
Last edited by a moderator:
Fantastic work, Michelle. So much to learn... for us. A real joy to watch.
Very interesting way, to prepare the frames in such a way
-> I am looking forward the work and your way, when you remove this "wrong" timber / frame parts
-> I am looking forward the work and your way, when you remove this "wrong" timber / frame parts
- Joined
- Sep 28, 2018
- Messages
- 249
- Points
- 348
Buonasera, ho preparato i quinti in avanti, ora sto procedendo con quelli addietro. Sono solo appoggiati, verranno fissati alla chiglia e distanziati con i relativi zoccoli solo dopo aver impostato l'arcacia e gli scalmi di prora. Una volta fissato il tutto procederò a pareggiare i quinti, non dovrebbe essere un gran lavoro in quanto già collimano abbastanza, dovrò solo fare molta attenzione visto la loro fragilità, 2 mm di spessore per gli scalmi... Per ora solo ancora tanta segatura
google translation:
Good evening, I have prepared the fifths forward, now I am proceeding with those backwards. They are only supported, they will be fixed to the keel and spaced with the relative hooves only after having set the arcacia and the fore rowlocks. Once set the whole thing I will proceed to equalize the fifths, it should not be a great job as they already collimate enough, I will only have to be very careful given their fragility, 2 mm of thickness for oarlocks ... For now only so much sawdust
google translation:
Good evening, I have prepared the fifths forward, now I am proceeding with those backwards. They are only supported, they will be fixed to the keel and spaced with the relative hooves only after having set the arcacia and the fore rowlocks. Once set the whole thing I will proceed to equalize the fifths, it should not be a great job as they already collimate enough, I will only have to be very careful given their fragility, 2 mm of thickness for oarlocks ... For now only so much sawdust
Last edited by a moderator:
Now we can see and realize the pieces, which will be removed later on (parts which have some yellow color)
It is getting more and more interesting -
Many thanks for the update
It is getting more and more interesting -
Many thanks for the update
- Joined
- Sep 28, 2018
- Messages
- 249
- Points
- 348
Buongiorno, ho terminato tutte le doppie coste e costruita l'arcaccia.
Very good progress my friend
A very good looking stern construction - beautiful
BTW: I like your way with the small timbers as spacers between the frames (better and more accurate than to have them cut out of the jig)
and the screws to hold the rubber bands
A very good looking stern construction - beautiful
BTW: I like your way with the small timbers as spacers between the frames (better and more accurate than to have them cut out of the jig)
and the screws to hold the rubber bands
- Joined
- Sep 28, 2018
- Messages
- 249
- Points
- 348
Buongiorno, ho terminato l'imboscamento di prora. Sono stati fissati il caposesto, le quattro coste deviate, l'apostolo e tutti gli altri scalmi di cubia.
