I could manufacture the deadeyes for you, You will need about 30 large ones for the lower masts, and 12 smaller ones for the upper masts. They will be about £5.00 each, slightly less for the upper ones. As I said earlier you will need a lot of rope and cordage which will have to be made. Then there will be the pully blocks. They
will be of various sizes, the largest being about 3/4 of an inch in length because of the size the blocks will have to be made as real blocks with sheaves inserted. you will need single , double and trebbel blocks, also a rams head block holding up the lower yards as these yards were not fixed to the masts. The rams head will be a trebel with the falls coming through sheaves in the main fife rail and made up. the reason for this is to take in sail by lowering the yard and removing the bonnet, thus making the sail smaller. I would guess the bonnet on your model would be about 3 to 4ins in height, I would need to see the model. Just as an after thought the deadeyes could be triangular or round, at this stage it was rather on the cusp of development, and the deadeyes on the American Mayflower were round, so round would be quite in order. The price of all of this work would be quite considerable, as it is all complicated work, and would take rather a lot of time. The cost I would say could be around £700.00 maybe less. should you be interested please let me know.
Yours faithfully. Majors.