Oh! For a table of saw, that would ascend.

Thanks, neptune. This fence is "temporarily out of stock" at micro-mark site which normally means forever. Can you clarify? Do you own a Proxxon FET or a Micro-Mark which looks like ProxxoneFet?
BEWARE

The Micro Mart fence does not fit the Proxxon FET,

27070.jpg
 
By the way. Guys. This micro-mark model looks exactly as Proxxon FET but had a ripping fence with no seeming problems as Proxxon saw has. Fence looks simple and reliable. Does anyone owns this model? Could they share their opinions about this model. If I did not own a Proxxon FET I would probably took a risk buying this saw. Today it is also much less expensive to Proxxon.

Do not forget the Proxxon FET and this model of micro-mark saw they have tilting saw feature which Byrnes do not have. ;)

Yeah, yeah, I know Byrnes has some expensive attachment to do tilted cuts.


You are getting mixed up, the Micro Mart saw doesnt look like the Proxxon FET, The Micro Mark saw has a different fence and also it has a variable speed control, the previous Proxxon model looked exactly like the Micro Mark one, thats why I said if you are going to get the Micro Mark saw get that fence to go with it,
best regards John.
 
Does anyone owns this model? Could they share their opinions about this model.
I got this, it is the FSK from Proxxon. I bought it second hand a long time ago, without fence. I ordered a new fence and got the upgraded version like the micro-mark. It works good. When setting up the fence you need to check if it is parallel to the sawblade. I did this by making markings on the table where I always can measure on 2 points. After that it is easy to setup.
 
You are getting mixed up, the Micro Mart saw doesnt look like the Proxxon FET, The Micro Mark saw has a different fence and also it has a variable speed control, the previous Proxxon model looked exactly like the Micro Mark one, thats why I said if you are going to get the Micro Mark saw get that fence to go with it,
best regards John.
It is the onder model of Proxxon the FSK, not the FET. 2 different machines. The FET got already micro adjustments.
 
Back
Top