The 1:48 version will have mast and rigging but that is months away
Modelship Dockyard - New Kit PoF 1:96 H.M.S. Enterprize 1774 by Modelship Dockyard
- Thread starter Modelship Dockyard
- Start date
- Watchers 25
- Joined
- Jan 30, 2023
- Messages
- 276
- Points
- 168
You wrote earlier that 1:48 will be available in the spring. Great news.
Do you know anything else about another project that we don't know? Only secrets ?
For everybody interested, we have already a topic explaining the original ship with a list of all sisterships and available contemporary drawings of the class - maybe helpful for later
HMS Enterprise / Enterprize (1774 - 1807) / 28-gun frigate / Enterprise class
HMS Enterprise (1774 - 1807) / 28-gun frigate / Enterprise class HMS Enterprise (also often spelled 'HMS Enterprize') was a 28 gun, 6th rate frigate built for the Royal Navy by the Royal Dockyard at Deptford. She was the lead ship of the Enterprise class of 27 small sailing frigates. The 6th...
shipsofscale.com
They just announced the kit is available on their site.
Thought you would want to know.
Here is the link for the boxwood version
drydockmodelsandparts.com
Hms Enterprize 1774 - 1:96 POF - Boxwood Version, Boxwood CNC decorations
Shipping is included in the total price!! Please allow 7 days to fulfill and ship the order!! The product is shipped from China!! Dimensions Length 48cm Width 9.6cm Height 11cm Prototype Build by Modelship Dockyard Hms Enterprize 1774 1:96 POF Admiralty model Hms Enterprize 1774 1:96 -...
drydockmodelsandparts.com
- Joined
- Mar 1, 2022
- Messages
- 358
- Points
- 168
Amazingly detailed model in that scale: width 9,6 cm... .
- Joined
- Aug 14, 2018
- Messages
- 600
- Points
- 353
Just had a look at the instructions and have to say they are by far better than those that come with HMS Blandford. Well done MS/D for the improvement.
JJ..
I'm still waiting to see the 1/48 scale.
Is this it, listed on the CAF site?
HMS Enterprise 1774
Scale 1/48 Length 840 mm 33" Width 210 mm 8.2" Body height 215 mm 8.4"
This is a different design from Caf ,not the same as from Modelship DockyardIs this it, listed on the CAF site?
No masts or rigging, though. Perhaps an intermediate step?HMS Enterprise 1774
Scale 1/48 Length 840 mm 33" Width 210 mm 8.2" Body height 215 mm 8.4"cafmodel.com
From Modelship Dockyard comes out in a few months a 1:48 version much more detailedIs this it, listed on the CAF site?
No masts or rigging, though. Perhaps an intermediate step?HMS Enterprise 1774
Scale 1/48 Length 840 mm 33" Width 210 mm 8.2" Body height 215 mm 8.4"
That looks just incredible! Except for the pencil and tweezers, I'd think it was full size, not 1/48. Above my ability, as well as my maximum size (unless built as Admiralty model), though.
Spring is getting closer ! I hope they are still on schedule.
with a good saw and some preparation works every cut is possible
- Joined
- Oct 9, 2020
- Messages
- 1,822
- Points
- 488
sorry. wrong post
- Joined
- Oct 9, 2020
- Messages
- 1,822
- Points
- 488
I had a look at the instuctions and compared the cabins there to the ones in the photos above. The ones in the photos above are different. I wonder if it's a question of artistic license or the instructions are out of date.
If you are interested there are high resolution drawings of the Enterprize (28) 1774 class, including the deck plans that were actually on the ship. Below is the hold with the platforms as an example. Go to the Wiki Commons website and go to page 8. Be careful, the first couple deck drawings for Enterprize are for after her conversion to a receiving ship which would not be appropriate for your build but the class drawings are there as well along with the names of the ships of the class. https://commons.wikimedia.org/wiki/Category:Ship_plans_of_the_Royal_Museums_Greenwich There is no high res of the inboard profile on the Wiki site but you can use these deck drawings in conjunction with the low resolution inboard profile that is on the RMG Collections site. https://www.rmg.co.uk/collections/objects/search/Enterprize
Allan
