• Ships of Scale has incorportated an extra level of security when you log In. Please follow on-screen prompts to acknowledge that you are not a robot via a "Check Box" or a "Pictorial Check Box Puzzle". This is needed due to higher level of AI Activity Security.
  • SUBSCRIBE TO SHIPS IN SCALE TODAY!

    The beloved Ships in Scale Magazine is back and charting a new course for 2026!
    Discover new skills, new techniques, and new inspirations in every issue.

    NOTE THAT OUR NEXT ISSUE WILL BE July/August 2026
  • Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.

San Felipe - ZHL JM

Well, I just can't let some things go. I like the nice neat rope coils I see on a lot of models next to the canons, but mine looked like garbage compared to those. Huge credit to Dave Smith on YouTube. I made my own little version of his jig using bottle caps. It works like a dream. A little watered down PVA and some heat with a heat gun locks the coils in place. What a great result. Unfortunately, I have some CA glue to scrape off the deck now .

20261020_204114.jpg

20261020_202804.jpg

20261020_201127.jpg

20261020_201235.jpg

20261020_201240.jpg
 
Thank you, this is great information. Yes, I have a set of sails for the ship and planned on using them. I would really like to go for the look in the attached photo. I like how having the lower sails partially unfurled makes it a little easier to see everything on the deck at once.

View attachment 613097

View attachment 613098
I strongly recommend that you study the sails' appearance before mounting yours. These sails look good but no crew would allow their own to look so haphazard. Indeed, the lower sails on the fore and main masts present real fire hazards if the cannons are engaged, which those on the model depict the cannons run out in firing position. It's just my recommendation; of course, it's your model.
 
I strongly recommend that you study the sails' appearance before mounting yours. These sails look good but no crew would allow their own to look so haphazard. Indeed, the lower sails on the fore and main masts present real fire hazards if the cannons are engaged, which those on the model depict the cannons run out in firing position. It's just my recommendation; of course, it's your model.
Is it the center parts of the course sagging that makes it look haphazard? Just trying to learn, thanks!
 
Is it the center parts of the course sagging that makes it look haphazard? Just trying to learn, thanks!
Thanks for responding! Yes, the center hangs much too low. The sail should be braided up to the yard when under fighting conditions. The other sails are much too loose. They would be spilling the wind and causing the ship to make little or no headway. Tighten them up. Again, these are just recommendations. It's your model; you should make it to your satisfaction.
 
Thanks for responding! Yes, the center hangs much too low. The sail should be braided up to the yard when under fighting conditions. The other sails are much too loose. They would be spilling the wind and causing the ship to make little or no headway. Tighten them up. Again, these are just recommendations. It's your model; you should make it to your satisfaction.
Thank you, this makes sense. I will use your recommendations!
 
Back
Top