"Start-up Conversations" and "Build Support-Tips, Advice" here.

Sorry if this has been answered already, but is there a complete Bill of Materials for the wood that is needed for this build?

I want to make an estimate of the costs.
 
is there a complete Bill of Materials for the wood that is needed for this build?
Not really that I have seen.
In my original attempt I followed @Tony P and ordered the following from @Dave Stevens (Lumberyard):
Frames:
70 pcs 1”x 24”x 7/32”
34 pcs 1.5”x 24”x 7/32”

Keel, stem, stern, ancillary parts:
6 pcs 1.5” x 24” x 9/32”
This was probably double of enough cherry wood to build this model especially since I did not follow the Hahn framing method as I originally planned.
 
Not really that I have seen.
In my original attempt I followed @Tony P and ordered the following from @Dave Stevens (Lumberyard):
Frames:
70 pcs 1”x 24”x 7/32”
34 pcs 1.5”x 24”x 7/32”

Keel, stem, stern, ancillary parts:
6 pcs 1.5” x 24” x 9/32”
This was probably double of enough cherry wood to build this model especially since I did not follow the Hahn framing method as I originally planned.
Thank you very much.
I think it would be a very good resource for SOS if they had a list over materials needed for different scratch builds.
 
Bonjour Donnie voici le lien de mon chantier du Rochefort dans le groupe de construction.

Hi Donnie, here is the link to my Rochefort building site in the construction group.
 
Back
Top