• Ships of Scale has incorportated an extra level of security when you log In. Please follow on-screen prompts to acknowledge that you are not a robot via a "Check Box" or a "Pictorial Check Box Puzzle". This is needed due to higher level of AI Activity Security.
  • SUBSCRIBE TO SHIPS IN SCALE TODAY!

    The beloved Ships in Scale Magazine is back and charting a new course for 2026!
    Discover new skills, new techniques, and new inspirations in every issue.

    NOTE THAT OUR NEXT ISSUE WILL BE July/August 2026
  • Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.

The Hayling Hoy, 1759 by AnobiumPunctatum - scale 1/36

AnobiumPunctatum said:
Not much happened in the last few weeks. I build the cant frames following the same methods I have described for the parallel frames. I create a template for each cant frame.

The fore cant frames (Sometimes it is not really necessary to build a model to create a nice picture):
View attachment 624907

View attachment 624908

The after cant frames:
View attachment 624909

View attachment 624910

The last photo shows one of the frames in detail:
View attachment 624911
Click to expand...
Not much ….. but some beautiful and nicely ordered stuff, Christian.
Gr. Peter
 
Thanks everyone very much for the Likes.

dockattner said:
Amazing work, Christian! You have a gift for CAD!
Click to expand...
Thanks Paul. You can besser say that I have may years of experience in 2D CAD

Peter Voogt said:
Not much ….. but some beautiful and nicely ordered stuff, Christian.
Click to expand...

Thanks Peter. I wanted to have all parts at one MDF plate...
 
After a long break it's time to continue with my log. Before I can start gluing all prepared parts together, I have to build the stern. It looks quite simple, because it consists of only two straight parts. But it has to take the shape of the aft. deadwood and the precision of this parts are important for the symmetrie of the stern.

First I milled both parts. The recesses I will need milling the glued parts next weekend.
Hoy-032.jpeg
To cut some two further recesses I prepared a small jig, to hold the inner post.
Hoy-033.jpeg

The next picture shows the test fit from the earlier prepared deadwood with the inner post. It's not really visible, but with the symmetrie of the fit I am really happy.
Hoy-034.jpeg

At the end I glued the two parts together. The small part from scrap helps to fit the parts.
Hoy-035.jpeg

Now the parts have one week toy dry and then comes the last step.
 
AnobiumPunctatum said:
After a long break it's time to continue with my log. Before I can start gluing all prepared parts together, I have to build the stern. It looks quite simple, because it consists of only two straight parts. But it has to take the shape of the aft. deadwood and the precision of this parts are important for the symmetrie of the stern.

First I milled both parts. The recesses I will need milling the glued parts next weekend.
View attachment 638034
To cut some two further recesses I prepared a small jig, to hold the inner post.
View attachment 638042

The next picture shows the test fit from the earlier prepared deadwood with the inner post. It's not really visible, but with the symmetrie of the fit I am really happy.
View attachment 638043

At the end I glued the two parts together. The small part from scrap helps to fit the parts.
View attachment 638044

Now the parts have one week toy dry and then comes the last step.
Click to expand...
Good to see you back on the yard, Christian. Some nice fitted parts!
Regards, Peter
 
You must log in or register to reply here.
Back
Top