current build images Your actual Ship Modeling Project - briefly introduced at a glance -> present it here

[DocTom]

Muscongus Bay Lobster Smack 1:24

From the Model Shipways "Become a Shipwright of Old" series. Build log is in the link

 

[Backer64]

Nice! Do you have a build log? If not, please start one from this point forward.

After a few days of copy paste en translating...
There is a build log on SOS.

see link in previous post

 

[Drzeus]

This great work of art in progress was supposed to represent "HMS Beagle". It's rather loosely based on a somewhat elder Mamoli kit.
View attachment 591313 View attachment 591314
View attachment 591315 View attachment 591317
Disclaimer: any resemblances with a ship called the “Beagle”, dead or alive in past, present or future times are wholly by chance and purely based on the modeller’s fantasy and incompetence.

Sure looks more like the Beagle than my HMS Victory does her namesake

 

[Bluemaxone]

Finished the model...

 

[ERSRich]

HM Badger

Going insane rigging cannon….

 

[Pfälzer]

Just Rigging, the End is near

 

[Dubz Modelling World]

HMS Enterprise 1774 midship cross-section in 1/160

 

[ERSRich]

HM Badger

The setup used for cannon rigging. Deck mockup, blocks stropped with 1/64” wire, blocks with rope tied to arse, lower right two pins for forming S hooks, cannon with Breeching rope.

 

[AllanKP69]

Going insane rigging cannon….

Hi Rich,
Sort of like making ratlines, lots and lots and lots, and lots to make. Is this the American merchant ship Defence that the RN re-named Badger in 1777 and which Nelson commanded? Looks like a really nice model.
Allan

 

[ERSRich]

Hi Rich,
Sort of like making ratlines, lots and lots and lots, and lots to make. Is this the American merchant ship Defence that the RN re-named Badger in 1777 and which Nelson commanded? Looks like a really nice model.
Allan

Sounds like it, made by Caldercraft/Nelson’s Navy….