Halve Maen (Half Moon), 1608 - Dutch VOC Vlieboot - Corel - 1:50 - Double-plank-on-bulkhead

Hi Eric,
I just became member of this forum few days ago. I am very interested in your sos log because I started building this kit a few weeks ago. Just finished outer planking. I will follow youre blog with great interrest.
I visited the replica of Halve Maen in Rotterdam a few weeks ago.
regards

René
Hello Rene'
Would you mind to start your own build log of Half Moon? I think it should be a great idea.

...and BTW, Welcome onboard SOS!!! We are happy you joined us!

@Brewbrarian Eric, sorry for hijacking your thread.
 
Hi Brewbrarian :)
it's looks great, beautiful results & progres.Thumbsup
I WILL CONTINUE TO FOLLOW
 
Hi Brewbrarian :)
it's looks great, beautiful results & progres.Thumbsup
I WILL CONTINUE TO FOLLOW
@shota70 , I'll second what Jimsky said--it would be great to see a second build log on the Haelve Maen. I'll be watching for yours to come up, and I'll follow back. This is only my 2nd build, and I hardly have the skill of some on this forum, but I'd be happy to answer any questions that I can.
Cheers.
Eric
 
Dear Eric :)
I am sure that as part of the site we will all succeed in developing the advanced skills, if only we will persevere in their learning and with the help of the good friends on the site and of course assimilate them in the models we build or build. I invite you to follow Hannah's log where I practice construction from Scratch and Priceland traditional construction from Kit.Thumbsup
 
This is GOOD progress, Eric! I agree with you on the use of the tung oil (I am in the fortunate position that I have 100% pure ("real pure" - not advertised, non-commercial) tung oil which I will probably use on the exposed wooden parts of the Haarlem. I say "probably", because tung has a few special quirks to it which require special attention up to the point that it has really dried and settled..
 
I agree, @Heinrich , I love these decks and the lines of both bow and stern.
Today I managed to finish the 1st planking at the focsle--talk about lines... :) I love the curves where the focsle planking meets the bowsprit.
@Maarten , Does that part have a name?--that is, the foremost portion of I suppose what would be the weather deck?

View attachment 152721View attachment 152723
I also managed to finish a little more of the lower planking to just below the waterline.
View attachment 152724
Are you using the little nails to hold the planks in place. I’ve never used them before (noob). Where did you get them and how do you nail them in?
 
I do like the helmsman‘s hutch. It looks much better than the Corel design. Do you have examples of ships with a similar hutch?
These are photos of paintings and a sketch from John Harland's article on the whipstaff. Harland doesn't name the ships, but the paintings are by Vroom, 1563-1640 (left), and Storck,1635-1710 (right).

Harland, J. (2011). The whipstaff. The Mariner’s Mirror, 97(1), 103–126. https://doi.org/10.1080/00253359.2011.10709035

1598035790643.png1598036292282.png
 
Are you using the little nails to hold the planks in place. I’ve never used them before (noob). Where did you get them and how do you nail them in?
I do use nails on the first layer of planking, but not on the second. (Until I'm trained in the art of trenails).
There are small brass nails that come with the kit, but they can be purchased also. I know Model-Expo sells some: https://modelexpo-online.com/search.asp?keyword=nails&sortby=0&page=3&catid=.
I actually use a normal hammer to tap them in, very light taps. (No desire for a stove boat!) I leave the nail head raised just a bit so I can pull them out once everything is set well.
 
Last edited:
Back
Top