HMS Euryalus 1803 - Scale 1:48 [COMPLETED BUILD]

[Lucius]

Hello Gennaro,
I started the construction 1 1/2 years ago and show you the pictures from the beginning. You can see the current status on my website
Greetings
Lucius

 

[Uwek]

But definitely we do not want a time lapse log of the past tense - it is really good to see the working steps with all steps
Many Thanks that you show us the complete build here in this topic

 

[Lucius]

Hello everybody,

the next steps are the Transoms inside the stern section









to be continued

Greetings
Lucius

 

[Uwek]

wunderschöne und präzise Arbeit, und das Holz einen schönen Farbton Birne or doch Elsbeere?)
wonderful precise work and the wood has a wonderful colour (pear or Elsbeere?)

 

[Lucius]

Hallo Uwe,

complete Pear.

Greetings
Lucius

 

[Stargazer]

Hello Gennaro,
I started the construction 1 1/2 years ago and show you the pictures from the beginning. You can see the current status on my website
Greetings
Lucius

What is your website address?

 

[Lucius]

Meine Homepage - Home

 

[Lucius]

Hello, everyone,

the transoms were adjusted, glued and sanded. Then the first frames were installed.







to be continued

Greetings
Lucius

 

[Uwek]

I wanted to ask this already since some time..... how you fix the individual frames, due to the fact, that you do not have notches in the jig (at the waterline).
But with this photo it is clarified - you use some wooden spacers clamped (and maybe later on permanent fixed?)

 

[Lucius]

Hello Uwe,

I fixed the frames with spacers on the inside of the Jig.

Greetings Lucius

 

[Stargazer]

Absolutely beautiful Lucius! I went to your website and I can see why you are doing so well on this scratch build, all of your models are exquisite, awesome attention to detail and execution of skill. I hope I have enough years left to develop skills such as yours, and if the Euryalus books are anything like the Niaid volumes you have all the documentation to produce an excellent model! Thank you for sharing your gifts with us!

 

[Lucius]

Hello Lou,

Thank you for the praise. I hope that one day I will finish the model

Greetings
Lucius

 

[Lucius]

Hello everybody,

it continues with the rear frames. The dowels are made of 0.5 mm pear









to be continued

Greetings Ruediger (Lucius)

 

[Uwek]

The nails are hardly visible, but after some oiling (or different wood treatment) will be more visible. Very good work.
One question: Which method do you use for production of the 0,5mm dowels? Zieheisen?

 

[Lucius]

Hello Uwe,

i use a draw plated and after sanding and processing with the scraper will make it looks better.



Greetings
Ruediger

 

[Lucius]

Hello everybody,

it goes on. Here are a few more pictures of the bulkheads from the stern area.







to be continued

Greetings
Ruediger (Lucius)

 

[Lucius]

Hello everybody,

The production of the remaining frames was a bit boring, but it had to be done.
Some information about this:
116 frames
954 individual parts
2412 dowel 6 Proxxon fine saw blades for the band saw
2 baskets of waste wood







to be continued

Greetings
Ruediger (Lucius)

 

[Paulpk]

Ruediger, very interesting construction approach. Very nice work. Thank you for sharing.
Paul

 

[Lucius]

Hello everyone,
The next step was to assemble the frames on the keel.









I deliberately did not mill in the keel because I made the experience that somehow nothing will fit properly afterwards. So spacers sat on the keel which are sanded after removing the frame. It's easier for me that way.



to be continued

Greetings
Ruediger (Lucius)

I hope the Google Translator is understandable enough for you

 

[Lucius]

Hello everyone,

Bulkhead, Bullhead, Bulkhead ........
















to be continued

Greetings
Ruediger (Lucius)