- Joined
- Jan 21, 2022
- Messages
- 534
- Points
- 353
I should explain mysel why I haven't posted anything on Royal Luis. First one is lack of time other is gathering resources for this project. I really shoundn't start it as a first build but watching what @GrantTyler is doing with his Victory made me want to try it any way.
There is no way I could build whole hull from scratch so I oredered one from @SZKUTNIK. I think it'll be first build log of 3d printed hull because I haven't found any other on internet.
I still need couple of tools but I will start building in june/july so this is no problem.
I haven't decided if it will be Le Commerce de Marseille/L'Ocean. It all depends on my carving skills or depth of wallet.
Wood that I already have
Pear (a lot)
Veneer pear 2mm
Veneer cherry 2mm
Veneer maple 1mm+0,6mm
Planset vs Le glorieux 1/150(Royal Louis 1/200 is even smaller)
Pear
Pear+cheery(middle one)
2mm Pear cut to 2mm strips
Maple
Thus see you all in june
There is no way I could build whole hull from scratch so I oredered one from @SZKUTNIK. I think it'll be first build log of 3d printed hull because I haven't found any other on internet.
I still need couple of tools but I will start building in june/july so this is no problem.
I haven't decided if it will be Le Commerce de Marseille/L'Ocean. It all depends on my carving skills or depth of wallet.
Wood that I already have
Pear (a lot)
Veneer pear 2mm
Veneer cherry 2mm
Veneer maple 1mm+0,6mm
Planset vs Le glorieux 1/150(Royal Louis 1/200 is even smaller)
Pear
Pear+cheery(middle one)
2mm Pear cut to 2mm strips
Maple
Thus see you all in june
Last edited: