• Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.

HMS Agamemnon by Caldercraft

I've started with deck planking. Something that still leaves me with a lot of doubt. Honestly, I don't know what the right method is. I've looked at a lot of photos and done research, and one person says this, another says that... So, what's the deal?

Ultimately decided to align the strips with the curvature of the Hull...
To achieve the curvature, I tapered the strips from 4mm to about 3mm.
Gluing them together was quite a challenge, but I finally succeeded using CA glue. After all, you have to bend the strips to achieve the hull's curvature.
The disadvantage of this technique is that you cannot apply the Four-step butt planking (well, I can't) because otherwise I wouldn't be able to get the curvature neatly (eg to bent the several pieces)....

1765561577784.png

1765561993443.png
 
Next step: installing the wall (officer cabins).
Here I had a small problem: because I had completely covered the deck with strips, the structure was too high. Ie the Poopdeck could not be placed Flush.
The solution: carefully cut two grooves so the sides could be glued directly to the main deck.


1765993040930.png
1765993120846.png
 
HMSFly said:
some details
View attachment 564828
Click to expand...
No, I don't like it, it looks very bad. To simulate a net, it is better to use tulle curtains or an insect net.
The white mesh is better to paint beige, I paint the ropes with water-based wood stain.
IMG_20251220_050855_908.jpg

Screenshot_20251220-053038.jpg

Screenshot_20251220-053800.jpg
 
Last edited:
You must log in or register to reply here.
Back
Top