Le Fleuron 1729 scale 1/75 - Boudriot & Delacroix

[KMSvideo]

 

[Mirek]

Witaj
Piękne wnętrze podoba mi się oświetlenie. Pozdrawiam Mirek

 

[KMSvideo]

Thanks @Mirek and everyone else for stopping by.

So I ended up using the printed galleon figurine I got from Salina01 and gave up on carving it myself (Salin is a friend from another forum). Salin's figurine is beautifully detailed and brings out the beauty of this ship.Thanks again, Salin.




Zároveň som nainštaloval aj bowsprit. Pripravil som si bobstay a tiež gammoning.

 

[Mirek]

Piękna figurka i cały model .Pozdrawiam Mirek

 

[KMSvideo]

Hi Mirek, I greet you too and thank you.

Today I have to brag about what I managed to mess up.

The bowsprit was not at the correct angle and was almost resting on the figure's head.



And while disassembling, I noticed that the lower Deadeye was rotated incorrectly.



Fortunately, it was all easily fixed.
Do you also experience accidents like this, or am I just that clumsy?

 

[Signet]

Do you also experience accidents like this, or am I just that clumsy?

Accidents?? That's just fine-tuning wonderful work!

 

[KMSvideo]

Thanks for the encouragement, friends.

During the week I finished the upper windows and doors. I left them open to give a better view into the large cabin.At the same time I also started the carvings.



And he finished the taillight (that's the last LED I attached). It's not perfect, but I'm glad it turned out this way. It was a little short and the bottom almost ended up in the trash. But I finally put it in. I made the entire wooden bottom with just files and small chisels.

 

[dockattner]

Wonderful work - can you share a bit more about how you built the 'cage' of the lantern? It looks beautiful!

 

[Mirek]

Witaj
Pięknie to wygląda. Pozdrawiam Mirek

 

[shota70]

amazing work indeed!!!
well done

 

[KMSvideo]

Wonderful work - can you share a bit more about how you built the 'cage' of the lantern? It looks beautiful!

Sorry @dockattner, I'm only answering now. I'm working on the back decoration and somehow I'm not succeeding, so my thoughts are flying all over the place.
I described the lantern cage earlier. Here's the link: https://shipsofscale.com/sosforums/...5-boudriot-delacroix.16899/page-6#post-496162

 

[KMSvideo]

Witaj
Pięknie to wygląda. Pozdrawiam Mirek

amazing work indeed!!!
well done

Thank you for the kind words.

 

[dockattner]

Sorry @dockattner, I'm only answering now. I'm working on the back decoration and somehow I'm not succeeding, so my thoughts are flying all over the place.
I described the lantern cage earlier. Here's the link: https://shipsofscale.com/sosforums/...5-boudriot-delacroix.16899/page-6#post-496162

Ah, my apologies for missing that post (or perhaps for just being forgetful). Lanterns turned out very nice!

 

[KMSvideo]

@dockattner niet sa za čo ospravedlňovať. Aspoň takto som mal dôvod pripomenúť ostatným klietku.

Pokračujem s rezbami. Veľmi sa mi nedarilo, najmä s dvojitými oblúkmi. Najprv som ich vyrobil z jedného kusu a pomaly som šablónou vyrezával drážky, ale museli ísť do koša.
Po dvoch pokusoch som zmenil technológiu a jednotlivé dvojité oblúky som vrstvil na seba. Nie je to 100%, ale som rád, že som to dostal aspoň do tohto bodu.

 

[BradNSW]

Those stern carvings are looking incredible!

Thanks for sharing the close-up photos of those carvings!!!

 

[Maarten]

They indeed look great, a great result with the different colours of wood.

 

[KMSvideo]

Dear friends @BradNSW a @Maarten, thank you for your encouragement.
Thank you also to those who stopped by for a moment.
I have made one carved pillar. Another one is waiting for me on the starboard side.



At the same time, decoration on the side.

 

[dockattner]

This is very fine work! I love how the pillar turned out!

 

[WojtasS]

Considering the scale you've made very precise work

 

[KMSvideo]

Thank you @dockattner and @WojtasS .

A few little things that really bothered me.
I originally made 8 of these mini arches. I broke two of them right at the beginning and one of them bounced off. Luckily I only needed 4.



But in the end it worked.



Just a size comparison with my finger.