Ah! Cheers Paul.
That makes sense.
That makes sense.
-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
HMS Victory cross section (De'Agostini)
- Thread starter Galley Slave
- Start date
- Watchers 26
-
- Tags
- deagostini victory
Hi All,
What glue can one use to attach PE parts together?
I am unable to solder as I do not have the equipment or the space.
Preferably something that would be available in the UK. (Edit)
Cheers,
Tony
What glue can one use to attach PE parts together?
I am unable to solder as I do not have the equipment or the space.
Preferably something that would be available in the UK. (Edit)
Cheers,
Tony
Hi Tony,
You can attach PE parts with CA glue, Just make sure both surfaces are clean from dirt and grease. Emery paper (1000 or 1500 grit) should do.
You can attach PE parts with CA glue, Just make sure both surfaces are clean from dirt and grease. Emery paper (1000 or 1500 grit) should do.
Thanks Jim. 
Will give that a go.
Will give that a go.
Hi Jim,
The CA glue worked perfectly.
This is what I have been working on.
For two reasons.
Firstly to investigate how Master Korabel design their kits and to see if I would have any problems with the instructions.
Secondly, to reactivate my desire to continue my build of the Victory cross section.
Not the best, but I really enjoyed building it.
Now to get back to the Victory.
The CA glue worked perfectly.
This is what I have been working on.
For two reasons.
Firstly to investigate how Master Korabel design their kits and to see if I would have any problems with the instructions.
Secondly, to reactivate my desire to continue my build of the Victory cross section.
Not the best, but I really enjoyed building it.
Now to get back to the Victory.
Hello Tony. I am glad my suggestion wad helpful! Your ship's boat looking very good, and could be a really nice addition to the actual model. What is the scale?
Hi Jim,
I believe the scale is 1:72.
It is the Master Korabel kit number MK0102.
I believe the scale is 1:72.
It is the Master Korabel kit number MK0102.
I really enjoyed building that little model.
A lot of firsts for me.
First time having to attach one PE part to another. (Attaching posts for rudder to hang from)
First time having to blacken PE parts. (Used Birchwood Caseys Brass Black)
First time to do planking on a curve. (Spiled planks are a MUST)
First time actually completing an entire model. (YES!!!!!)
Great fun and feeling of accomplishment.
I am aware that there are quite a few errors in the build, but lessons learned.
A lot of firsts for me.
First time having to attach one PE part to another. (Attaching posts for rudder to hang from)
First time having to blacken PE parts. (Used Birchwood Caseys Brass Black)
First time to do planking on a curve. (Spiled planks are a MUST)
First time actually completing an entire model. (YES!!!!!)
Great fun and feeling of accomplishment.
I am aware that there are quite a few errors in the build, but lessons learned.
Nothing can make you proud than a complete build! Congrats!
- Joined
- Sep 30, 2019
- Messages
- 7
- Points
- 23
Hoping to see more of your Victory cross section build. Have just finished the DeAgostini build myself sort of. I only had a few of the part works bought as a job lot from ebay and added bits from all over the place. Not a very accurate scale model but I was pleased with it and mummy let me display it in the lounge.
Hi Steve,
I am hoping to show more of the build soon.
Unfortunately, I can only do about 10-20 minutes of build a day, and then not every day, so progress is painfully slow.
But I have managed since I last posted, to complete the hammocks and the pumps.
I am now in the process of working on the brackets supporting the knees and the beams.
Then its a case of bringing all of the above together.
Will post a few pics of where I am soon.
Thanks for your interest mate.
I am hoping to show more of the build soon.
Unfortunately, I can only do about 10-20 minutes of build a day, and then not every day, so progress is painfully slow.
But I have managed since I last posted, to complete the hammocks and the pumps.
I am now in the process of working on the brackets supporting the knees and the beams.
Then its a case of bringing all of the above together.
Will post a few pics of where I am soon.
Thanks for your interest mate.
- Joined
- Sep 30, 2019
- Messages
- 7
- Points
- 23
Looking forward to your progress. I made a total mess of the hammocks and most ended up in the hammock netting on deck. Chain pumps were a poor scratch build and elm tree pumps too big from an other ship, but as I said before I did enjoy doing it.
I will have to admit that it was the hammocks that dampened my enjoyment of building this model.
They are really a B with an itch.
They came out 'OK', but seem to have a little twist in each of them.
Most annoying.
They are really a B with an itch.
They came out 'OK', but seem to have a little twist in each of them.
Most annoying.
Hallo Tony,
we from SOS wish you all the Best and a HAPPY BIRTHDAY
Enjoy your day
we from SOS wish you all the Best and a HAPPY BIRTHDAY
Enjoy your day
Happy Birthday Tony! Have a wonderful day from all of us!!
Thank you all for the birthday messages.
Means a lot.
Means a lot.
Hi Tony, really great work with the HMS Victory cross-section model. I checked all your images and the progress is just great. I can't wait to see more. Keep up the great work.
Also, I like your table and little boxes you have.
Also, I like your table and little boxes you have.
Hi Max,
Thank you for your kind comments.
Unfortunately, construction in the ship yard has all but ceased.
The workers are out on strike and management refuse to budge.
Negotiators have been called in, but these can be very protracted negotiations.
Hopefully things will resolve for the best in the near future.
We can but live in hope.
Tony
Thank you for your kind comments.
Unfortunately, construction in the ship yard has all but ceased.
The workers are out on strike and management refuse to budge.
Negotiators have been called in, but these can be very protracted negotiations.
Hopefully things will resolve for the best in the near future.
We can but live in hope.
Tony
Hopefully @Galley Slave all works will be resumed soon.
All the best!
All the best!
May I take this opportunity to wish ALL members of the SOS forum a truly happy and blessed Christmas and all the very best for the New Year.
Now don't go and make any new year's resolutions you have no hope of fulfilling.
Been there. Done that. Bought the T-shirt. ----------- Lost the T-shirt.
Now don't go and make any new year's resolutions you have no hope of fulfilling.
Been there. Done that. Bought the T-shirt. ----------- Lost the T-shirt.