1805 Virginia Swift by AL

Rob444 said:
I would junk both (or how many there are) smokestacks and use wood dowels. Two thirds of the way up I would use a miter box and cut them at a 30 degree or so bias and then use another piece with the same bias as the top part to produce a bend in the "pipe".
Click to expand...
I ground down a piece of wood sprue and made a first attempt at a smokestack. It broke while sanding. Second attempt is just carving from a piece of wood sprue. My total life experience at carving consists of the bow/stern of this model and this smoke stack. I'll give it some more sanding and maybe paint it to see if it is acceptable. See below.IMG20240216060647.jpgIMG20240216060659.jpg17080962234203292376227964963273.jpg
 
Here's the finished smokestack.
My Bluenose kit is being delivered today.
With all the poop problems I've had with poor and disentegrating materials on this kit, I feel like I m polishing a turd. Having been a remodeling general contractor for years I'm fairly experienced at turd polishing but the luster is soon gone 1708110452675776316014335033622.jpg
 
I'm attempting to make part 102 of the attached photo. I amealed the brass strip but was not able to get the bends tight enough. Right now I'm using a file to thin the brass strip. Any suggestions that might help are appreciated. IMG20240218092402.jpg
 
Here's the results from thinning the brass strip. I'm really happy with my progress. I'm such a newbie it like getting off my tricycle and getting on a bike. 17083676970142131871362366768558.jpg
 
Although you may at times feel like you're "polishing a turd", the positive spin I put on it is simply to look at all the things you've learned in the process of building this kit. Those skills will come in handy in future builds, and also give you insight into how to approach and navigate other challenges you'll face in assembling other kits. FWIW, I think you're doing just fine, and in the end you'll be your own most harsh critic. Others viewing your finished model won't see or even notice a quarter of what you personally perceive as flaws. Keep up the good work! You've inspired me to tackle my Swift as well, and I may create a build log as well. That would be my first on this site, but perhaps I'm long overdue to do just that.
 
seadeep said:
Although you may at times feel like you're "polishing a turd", the positive spin I put on it is simply to look at all the things you've learned in the process of building this kit. Those skills will come in handy in future builds, and also give you insight into how to approach and navigate other challenges you'll face in assembling other kits. FWIW, I think you're doing just fine, and in the end you'll be your own most harsh critic. Others viewing your finished model won't see or even notice a quarter of what you personally perceive as flaws. Keep up the good work! You've inspired me to tackle my Swift as well, and I may create a build log as well. That would be my first on this site, but perhaps I'm long overdue to do just that.
Click to expand...
Thank you for reminding me that this is for fun. I am gaining valuable experience and having a blast

17086261122963784754497644955249.jpg
 
Almost finished. Need to rig four 170871697513193164046540540107.jpgpairs of deadeyes and ran out of stock for the smaller line. The total amount of scrap is surprising small. Photo attached. I got so frustrated that I actually measured the cutoffs and found that I would have been short two sets of deadeyes with no waste. I guess I'll go to Michaels and JoAnns and try to fond something that'll match.17087172558533607487404883018828.jpg
 
I've been moaning about how shoddy this kit is, but in fact, Im very grateful for every defect. I bought this kit as a tuneup for a legitimate project. I got more than my moneys worth. I have learned so much more by having to solve problems every step of the way. Today The line running short resulted in a trip to JoAnns for some thread. Found Gutterman thread17087311267633879267357258227918.jpg there and made my first rope. $4.00 for 30 yards ouch. It will get this Swift kit finished and I'm pleased.
 
Whopie, The Virginia Swift is finished. Awaiting better light to take the final photos.. on to the awaiting in Bluenose project.
 
My congratulations already without seeing the final result - hope the weather conditions are changing
 
You must log in or register to reply here.
Back
Top