Deadwood added to the bow, and the keel and frames are then clear coated on the exterior...
-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
Internal framing has begun...
Last edited:
Cross beam assembly completed, and mast bases installed, then clear coat added to all of the frames and beams, prior to beginning the deck beam installation.
Installation of the deck beams has begun...
Deck beam installation continues...
A few side views of the deck beams...
A few side views of the deck beams...
A few more pics of deck beam installation progress..
Deck beam installation continues...
Deck beam installation continues at the cabin area of the stern deck...
On the home stretch of the deck beams...
Deck beams completed...another milestone! 
Bow deck installation begins by framing the perimeter and adding some planks, waterway boards are then added on top. I chose to do individual planks verses using the supplied deck sheets. I purchased some ramin boards to use for the deck.
Upper stern deck perimeter and planks added, then waterway boards installed. And then the frames were cut at the specified location per the instructions and the jig was finally removed! Now that she is free of the jig, I can complete the deck planking!
Last edited:
Deck planking completed!
I decided to leave a cutaway opening in the stern and bow decks, on the open frame side of the hull. This allows viewing of the deck beams, and also the internal beams and frames, as well as allowing light to enter the lower section for better viewing from the open starboard side.
I decided to leave a cutaway opening in the stern and bow decks, on the open frame side of the hull. This allows viewing of the deck beams, and also the internal beams and frames, as well as allowing light to enter the lower section for better viewing from the open starboard side.
I sanded the deck in preparation for stain...
With the deck stained, the hull planking began starting with the bulwarks...
Bulwarks painted white inside...
Hull planking continues...cap railing is being prepared for installation.
Cap railing goes on and hull planking progresses....
Hull planking completed...time to sand and prepare for clear coat!
Clear coat applied to the planking...
Before...
After...
Before...
After...