Bomb Vessel Granado Cross Section, Scale 1:72, POF Kit by Miniature Arts

[Dubz Modelling World]

I did Mortar Cap Square and Mortar Support (simplified). Unfortunately the Mortar is not made very good (white metal) ...

Cheers

Dirk

 

[serikoff]

I really liked your work. And the main thing is the style of the photo. I am often too lazy to set up the light, take the camera, put the background... more often I take a picture on my phone and ok. Although I am a good photographer, but I am so lazy))))

 

[Dubz Modelling World]

Thank you

I have a small photobox in a corner of my room and just use my iPhone to take the pictures, then a little postprocessing with ACDSee uploading to my gallery site and done

Dirk

 

[Kurt Konrath]

If the real cannons looked cracked like the model, I would be afraid to fire them thinking the metal will crack apart with any next firing.

 

[Dubz Modelling World]

One of the last small missing details - The kevel cleats sitting on the sheer rail is done

Next and last will be finishing the guns. The cross section will miss the keel rabbet though, I thought I could it done later but I have no idea how to do it without risk of damage.

Cheers

Dirk

 

[Dubz Modelling World]

Daniel @dafi were so kind to print me some great guns

They were primed with vallejo primer and then touched with a pencil to give it a slightly metallic appearance.

The carriages are a bit to low but that is fine for me, I need to call this project done :-D

Cheers

Dirk

 

[dockattner]

Congratulations! Another great build coming off your workbench!

 

[Peter Voogt]

Daniel @dafi were so kind to print me some great guns

They were primed with vallejo primer and then touched with a pencil to give it a slightly metallic appearance.

The carriages are a bit to low but that is fine for me, I need to call this project done :-D

Cheers

Dirk

A very nice result, Dirk. It’s looking great!
Regards, Peter

 

[AnobiumPunctatum]

Congratulations for finishing this beautiful x-section.

 

[AllanKP69]

Daniel @dafi were so kind to print me some great guns

First and foremost, your build is exquisite! Regarding the cannon, when you say printed, are they 3D resin printed? What pattern are they?
Thanks Dirk
Allan

 

[RichardG]

Very inspirational. Just starting my one.

 

[Dubz Modelling World]

I guess we all agree the mortar of the kit looks like major crap ... yes, you may feel free to agree with me, secretly one or the other has certainly thought that

So again Daniel @dafi performed a few miracles and "rebuilt" and printed the correct mortar for me. What a difference and what an upgrade to the model, right? So if you need a set of guns for this kit try to ask him

Cheers

Dirk

 

[dockattner]

I thought this model was done . Does look better though!