All of the flat frames are glued in to the keel now !
Here is a picture for @dockattner (and others too
)
Now on to building the cant frames !
Here is a picture for @dockattner (and others too
)Now on to building the cant frames !
-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
- Joined
- Feb 25, 2020
- Messages
- 18
- Points
- 48
I don’t know Corsair… Are you sure this isn’t AI generated? Your shop is way to organized and clean… Even the clamps are in organized rows.All of the flat frames are glued in to the keel now !
Here is a picture for @dockattner (and others too
Now on to building the cant frames !
View attachment 542747
They are just clipped onto a bar that is part of a mount to hang stuff.
I like it because it keeps them handy.
Oh, some of us talked about this in the past. My shop is one bay of my garage and for the shop, I put down an epoxy finish with no speckle which makes it really easy to sweep and also to see dropped parts. The drawback is if it gets wet, it is VERY slippery !
A little off track, but I THINK it was Longridge that described laying out the shop floor with black and white checker pattern tiles. Makes it easy to find parts, both light and dark ones. Plus, it looks like the captain's ward room
Last edited:
And a fine photo it is, Jeff. Now the hard frames…
That’s looking very nice, Jeff. A big step, a lot of practice for the next parts.All of the flat frames are glued in to the keel now !
Here is a picture for @dockattner (and others too
Now on to building the cant frames !
View attachment 542747
Regards, Peter
Thank you.
Lovely progress Jeff.All of the flat frames are glued in to the keel now !
Here is a picture for @dockattner (and others too
Now on to building the cant frames !
View attachment 542747
Thanks Grant.
Well, if she says that, why not do it. The epoxy makes a HUGE difference with clean up.Hey Jeff,
That looks really excellent. Just great. Your garage is great. If my wife saw it now, she would immediately say: "See, others do that too... ..." Why don't you?
Best regards
Günther
I just finished gluing up the forward cant frames !
Next will be to trim off the excess from the frame chocks and then fitting them onto the keel in the building jig !
Next will be to trim off the excess from the frame chocks and then fitting them onto the keel in the building jig !
Your clean neat work area makes for clean crisp joinery.
Thanks Daniel !
Good morning Jeff. Ahh those cant frames. Did the kit give you the angles to cut/sand where they attach to the keel. This can be tricky.....so all looks perfect. Enjoy. Cheers Grant
Thought I might circle back of this for two principle reasons.
First, as a follow on from post 325, here is finish I outlined, on the well. Not as dark as photo implies and it will lighten when completely dry but, all in all, I like it.
Lastly, another cautionary note. IMHO, do not rely on drawings/sheets for any vertical structures....well, partitions, etc, they're not super accurate and you need to take measurements, make templates, make adjustments, especially where pieces locate on beams......slows everything down, but moving along.
Everything still dry fit only until all individual pieces assembled and I can lay down finish to everything under platforms.
Starting to look like an actual ship.
Tim
First, as a follow on from post 325, here is finish I outlined, on the well. Not as dark as photo implies and it will lighten when completely dry but, all in all, I like it.
Lastly, another cautionary note. IMHO, do not rely on drawings/sheets for any vertical structures....well, partitions, etc, they're not super accurate and you need to take measurements, make templates, make adjustments, especially where pieces locate on beams......slows everything down, but moving along.
Everything still dry fit only until all individual pieces assembled and I can lay down finish to everything under platforms.
Starting to look like an actual ship.
Tim
Last edited:
Beautiful !!!
Thank you very much for all the likes. The few cant frames that are doubles have been glued together. The next step is to sand them with the appropriate bevel.