• Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.

HMS Endurance Build . . .

  • Thread starter Thread starter Rebus
  • Start date Start date
  • Watchers Watchers 12
Was not looking forward to building these ladders. First ship I did them for took too long and produced a few extra words.

This time I made a jig to hold the uprights. Two saw blade cuts about 1mm deep rung distance apart. Can place enough rungs to stabilize the whole ladder. Once the CA sets remove and add the remaining rungs. When completely set then the surfaces can be sanded before priming.

Much faster this time and very few extra words.

1000002996.jpg1000002997.jpg
 
Most of the deck furniture is done and in place. Cutting out the stanchions and placing them was quite a project. Started last night adding the ropes that was not much easier. It will look good when I finish but I would rather do ratlines I think.

1000002998.jpg1000002999.jpg1000003000.jpg
 
Last edited:
Rebus, that’s really looking sharp!

Appears you might have knocked the portside funnel out alignment, although it could just be the perspective in the photo.
 
Namabiiru said:
Rebus, that’s really looking sharp!

Appears you might have knocked the portside funnel out alignment, although it could just be the perspective in the photo.
Click to expand...
Namabiiru,

First thing I looked at when I got home was to see if it was the perspective or if I needed to fix the funnel. I was happy to find out it was just the perspective. Thanks for saying something, I would hate to miss a small mistake like that.

Cheers,
Rebus
 
You must log in or register to reply here.
Back
Top