• LUCZORAMA SHIPWRECK SCAVENGER HUNT GIVEAWAY. 4 Weeks of Fun • 1 Legendary Prize ((OcCre’s Fram Ship)) • Global Crew Welcome!
    **VIEW THREAD HERE**

HMS Enterprize 1774 by arban007

Will you be tapering the knee of the head to the 6 inches called out in the original contract?

The knee of the head to extend to the upper side of the upper cheek, to be 11¾ ins thick at the stem and 6 ins at the fore end; the 2 upper bolts to be 1¾ ins diar in the knee, & 1⅝ ins in the stem, the third 1½ ins in the knee & 1⅜ ins in the stem, the fourth 1⅜ ins in the knee & 1¼ ins in the stem, the fifth to be 1¼ ins in the knee, & 1¼ ins in the stem; & all the rest to be 1¼ ins diar quite thro’. All the holes to be bored thro’ with proper size augers, that is, to receive the bolts in the least drift, that no Reeming may be suffer’d from the stem in, that the holes be bored before the Canvas is put on, & the knee swung off, to observe if the Holes are all good, before any bolts are drove: To have a Throat piece of sufficient depth of elm, tabled & billed, & well secured with bolts drove up with plugs'

Allan
 
 
You must log in or register to reply here.
Back
Top