HMS Ontario 1780 scale 1:32 POB full version

zoly99sask

Administrator
Staff member
Administrator
Joined
Apr 13, 2015
Messages
6,454
Points
738

Location
Saskatoon,Canada
Hello Zoly, It is nice to see you back at your Ontario build again. Those thick planks will be slow going, but you are doing a great job of bending and fitting them. Are you using CA to fasten these bent planks?
Regards Lawrence
Hi Lawrence ,yes I am using CA to secure the planks ,the main glue is Pva though.
 
Joined
Jun 19, 2020
Messages
1,283
Points
443

Location
Woudrichem, Netherlands
Hello Zoltan,
It took me some time to get in your “over-the years” scratch build-log. There is so much to see on the SoS. And took some time to walk through the pages. With the nice communication in the beginning to get started. The foam pre-build was interesting.
I am glad I am in on time to follow to the end ;).
Regards, Peter
 
Joined
Sep 22, 2020
Messages
647
Points
318

Location
Ehingen a.d. Donau Germany
Hello Zoltan,
It took me some time to get in your “over-the years” scratch build-log. There is so much to see on the SoS. And took some time to walk through the pages. With the nice communication in the beginning to get started. The foam pre-build was interesting.
I am glad I am in on time to follow to the end ;).
Regards, Peter
Hi Zoltan, I aggree with Peter completely, wonderful work.
 

Maarten

Staff member
Forum Moderator
Joined
Sep 10, 2017
Messages
2,465
Points
628

Location
The Netherlands

zoly99sask

Administrator
Staff member
Administrator
Joined
Apr 13, 2015
Messages
6,454
Points
738

Location
Saskatoon,Canada
Greetings Zoly. Nice work!!
Given your position as a model, I would suggest the method I took to secure the boards with medical rubber. Simple, cheap, efficient. There is no risk of damage to the boards. Ondras :cool:


View attachment 206213

View attachment 206214
Thank you Ondras!I may use in some cases I can’t hold/secure the plank,I am using both Ca and wood glue
 

zoly99sask

Administrator
Staff member
Administrator
Joined
Apr 13, 2015
Messages
6,454
Points
738

Location
Saskatoon,Canada
Hi Zoltan, I aggree with Peter completely, wonderful work.
Thanks!


Hello Zoltan,
It took me some time to get in your “over-the years” scratch build-log. There is so much to see on the SoS. And took some time to walk through the pages. With the nice communication in the beginning to get started. The foam pre-build was interesting.
I am glad I am in on time to follow to the end ;).
Regards, Peter
thanks Peter,I am a slow builder,this build will take a long time.
 
Top