Only of the WA coast up to the Kimbalies
-
LUCZORAMA SHIPWRECK SCAVENGER HUNT GIVEAWAY. 4 Weeks of Fun • 1 Legendary Prize ((OcCre’s Fram Ship)) • Global Crew Welcome!
**VIEW THREAD HERE**
HMS Royal Caroline kit ZHL 1/30
- Thread starter Maarten
- Start date
- Watchers 112
-
- Tags
- royal caroline zhl
I don't know Maarten, they are very small, I would like to do something like yours but with a different picture of course, if you don't mind, where abouts did you get your picture from,
best regards John.
Hi John,
I search in google under pictures for van de velde.
But you can just use google picture search.
I search in google under pictures for van de velde.
But you can just use google picture search.
G'day Maarten
I have to apologize to you. I've done some research on Dirk Hartog and he did do a reasonable job of mapping Australia.
This is very impressive representation of Australia.
I have to wonder what we Ozzies would be like if Holland not England colonized this great country.
Food for thought!
Greg
I have to apologize to you. I've done some research on Dirk Hartog and he did do a reasonable job of mapping Australia.
This is very impressive representation of Australia.
I have to wonder what we Ozzies would be like if Holland not England colonized this great country.
Food for thought!
Greg
You have to ask Uwe, being an Austrian. Most probably he would say Aussies would be more polite then without the Dutch influence. 
This evening I spent some time on the great cabin again. The PS and SB sides will both be fitted with a bench along the sides with a cabinet in between.
But first the frame is cutted away, the hull thickened and a panel fitted.
To create everything in proper size for the 1:30 ratio I also glued togetherone of the chairs which is supplied with the kit.
The inner panel for the SB side. The W is at the position for the cabin windows. The notches in the top are for fitting the deck beams.
The next step is remove the windows and fit the bench along the entire cabin wall.
The lower part of the bench is covered with the paneling as provided in the kit.
And dry fitted in place.
Between the two windows I will create a cabinet, I am not going to use the two cabinets as provided in the kit for this cabin.
Next time I continue on the cabinet etc.
But first the frame is cutted away, the hull thickened and a panel fitted.
To create everything in proper size for the 1:30 ratio I also glued togetherone of the chairs which is supplied with the kit.
The inner panel for the SB side. The W is at the position for the cabin windows. The notches in the top are for fitting the deck beams.
The next step is remove the windows and fit the bench along the entire cabin wall.
The lower part of the bench is covered with the paneling as provided in the kit.
And dry fitted in place.
Between the two windows I will create a cabinet, I am not going to use the two cabinets as provided in the kit for this cabin.
Next time I continue on the cabinet etc.
G'day Maarten
I'm looking forward to see another 'Maarten's touch' to this awesome build.
You are making it virtually impossible for someone to get close to your standard in this build. With all of your touches, this build is destined to be a
Happymodeling
Greg
I'm looking forward to see another 'Maarten's touch' to this awesome build.
You are making it virtually impossible for someone to get close to your standard in this build. With all of your touches, this build is destined to be a
Showcased Quality
Museum Model.
Well done my dear friend.Museum Model.
Happymodeling
Greg
Gents thx for your comments.
Inspiration was partly the interior of the Chapman yacht Amphion. As the interior is not known you can let go your creativity as long it fits the time frame.
Inspiration was partly the interior of the Chapman yacht Amphion. As the interior is not known you can let go your creativity as long it fits the time frame.
Not to much progress as I was travelling a lot the last two weeks. But today had some time to build the cabin PS side, a mirror copy of the SB side.
On both sides a cupboard will be integrated.
In the front of the cupboard a glass door will be fitted and the inside I will decorate as book case.
In the door I have carved a space to fit the glass. After fitting the glass the cupboard will be veneered enclosing the glass.
Hopefully coming week I have a little bit more time to make some progress.
On both sides a cupboard will be integrated.
In the front of the cupboard a glass door will be fitted and the inside I will decorate as book case.
In the door I have carved a space to fit the glass. After fitting the glass the cupboard will be veneered enclosing the glass.
Hopefully coming week I have a little bit more time to make some progress.
G'day Maarten, ingenuity and adaptation must be your middle names, very nice workmanship,
Best regards John,
Best regards John,
Hi John many thx.
Today I bought a collection of small pieces of veneer to decorate the great cabin. These are coming from a large veneer trader and the remaining small pieces they sell at a low price in an assortment package. Ideal for model shipbuilding or creating veneer inlays. So I hope I have some nice contrasting veneers coming week to decorate the great cabin.
Today I bought a collection of small pieces of veneer to decorate the great cabin. These are coming from a large veneer trader and the remaining small pieces they sell at a low price in an assortment package. Ideal for model shipbuilding or creating veneer inlays. So I hope I have some nice contrasting veneers coming week to decorate the great cabin.
While I am awaiting my veneers to come in this week I am working on the inside of the two cabinets.
The lower shelf is fitted and the sides are covered with veneer. The cabinet will be filled with books. First I thought to fill one with china but for a ship which is rolling from time to time this is not a good idea. On the top you see the parts for the book shelfs.
This is the side view of the shelfs, in between the print of books will be fitted.
Dry fitting the empty book shelfs.
On internet I googled for some pictures of books from the time period and fitted them to size, see above.
After cutting and fitting we have three shelfs of reading materials for the King during his voyages.
And with the door and glass in front of it. Now the door needs finishing with veneer.
And again dry fitting.
The lower shelf is fitted and the sides are covered with veneer. The cabinet will be filled with books. First I thought to fill one with china but for a ship which is rolling from time to time this is not a good idea. On the top you see the parts for the book shelfs.
This is the side view of the shelfs, in between the print of books will be fitted.
Dry fitting the empty book shelfs.
On internet I googled for some pictures of books from the time period and fitted them to size, see above.
After cutting and fitting we have three shelfs of reading materials for the King during his voyages.
And with the door and glass in front of it. Now the door needs finishing with veneer.
And again dry fitting.
Very neat and cleverly done, looking good Maarten,
Best regards John,
Best regards John,
G'day Maarten
John has beaten me to the punch. Ditto from me a well.
All your brilliant ideas will come into use for others mate.
Happymodeling
Greg
Just love your detail work and as for the china, it could be mounted on the walls as was very common in olden days.