L'Amarante - French corvette from 1747 scale 1:30 [COMPLETED BUILD]


Dear Ricci/Giampy65
I have questions for you if it's possible
1. How to create the apparent slope in the current halves of the frames
(I am attaching a picture with the drawing and what I built, as well as the area with a black line that I am having difficulty with)
20231202_163832.jpg20231202_163832 (1).jpg20231202_163832.jpg
The next subject in which I have difficulty understanding the way of working and reaching the required result is in regards to the way of creating the connection of the split frames connecting to the Transom beam and the Wind transom.
In the first attempt I made the connection areas of the two parts straight and without bending/angle and when I tried to glue the frames to the Wind transom there was a gap of about 1.8 mm. After re-examination I understand that I am required to make the connection areas inclined at a small angle/bending, But I don't know what the right and appropriate
method
20231202_164016.jpg
20231202_164016 (2).jpg20231202_164016 (1).jpg20231202_164016.jpg
thank you very much for your help
 
Last edited:
Back
Top