• Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
  • PRE-ORDER SHIPS IN SCALE TODAY!

    The beloved Ships in Scale Magazine is back and charting a new course for 2026!
    Discover new skills, new techniques, and new inspirations in every issue.

    NOTE THAT OUR FIRST ISSUE WILL BE JAN/FEB 2026

Le Requin by Zhl - MY FIRST POF MODEL

 
 
RichardG said:
Very nice work, and such an interesting vessel. What is your opinion on the Proxxon table saw, does it work well on very small stock?
Click to expand...
Thank you. There are 2 models of table saw, I bought the big one as it allows to work also with big pieces; if your use is with very small pieces maybe it is better the smaller. It is very precise, after the cut is not either required to sand the piece.
However it is a very dangerous tool, be careful.
 
Alessandro63 said:
Thank you. There are 2 models of table saw, I bought the big one as it allows to work also with big pieces; if your use is with very small pieces maybe it is better the smaller. It is very precise, after the cut is not either required to sand the piece.
However it is a very dangerous tool, be careful.
Click to expand...
Thank you, and congratulations again on a very beautiful vessel.
 
You must log in or register to reply here.
Back
Top