-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
today Raba haver
Wonderful carving Shota, the way that wood grain runs really brings out the look of the owl.
- Joined
- Apr 20, 2020
- Messages
- 6,051
- Points
- 738
thanks, my Dear friend
- Joined
- Apr 20, 2020
- Messages
- 6,051
- Points
- 738
Hello dear friends
Today I took the time to sharpen my carving chisels that have accumulated over the past few months. I purchased some of them during my recent vacation in New York (4 of these with the little pear handle on the bottom right).
I decided to do this to maintain the competency and skills development I had learned in the course and after the spectacular carvings I saw at an exhibition in Augsburg I realized I had to practice to develop. So the first step of course is well-honed tools, in practice I only provided the six medium chisels at the top right (the family asked to go to the cinema and watch a movie). The grinding process is based on grinding stones in water from a density of 600 to 6000 and a final polishing in another strip or cloth wheel on a manual dermal. At the end of the process I checked the quality on a wooden board and if necessary I repeated the process. There is also a round and triangular grinding stone.
In the coming days I will continue until all the chisels are sharpened.
Today I took the time to sharpen my carving chisels that have accumulated over the past few months. I purchased some of them during my recent vacation in New York (4 of these with the little pear handle on the bottom right).
I decided to do this to maintain the competency and skills development I had learned in the course and after the spectacular carvings I saw at an exhibition in Augsburg I realized I had to practice to develop. So the first step of course is well-honed tools, in practice I only provided the six medium chisels at the top right (the family asked to go to the cinema and watch a movie). The grinding process is based on grinding stones in water from a density of 600 to 6000 and a final polishing in another strip or cloth wheel on a manual dermal. At the end of the process I checked the quality on a wooden board and if necessary I repeated the process. There is also a round and triangular grinding stone.
In the coming days I will continue until all the chisels are sharpened.