Making your own Ropes

[Phillipsart]

When the 10% is reach, both machines must turn, like I explain in the document and in the video.

Do I wind both in RH direction when both are twisting ?

 

[Steef66]

Do I wind both in RH direction when both are twisting ?

Yes. The switches are so constructed that both need to have the same stand. "I" for RH rope or "II" for LH cable.

I missed that. All the rope I’ve made so far I did not spin the wiel when I did the last wind with the Bok. And the ropes turning out awesome

The reason why the last part of the rope looks loose and why you needed to go to 13%.

 

[Dubz Modelling World]

@Steef66 I guess also with your machine it would be possible to use a rolling swivel instead using the 2nd machine, correct? In my experience, better said with my setup I need the second motor explicitly for smaller rope everything above 0.6 mm works with the rolling swivel, what is a bit easier then.