Roter Löwe 1597 by Ondras71 - scala 1/60

[Jimsky]

Congrats on the silver medal! Well deserved!

 

[Ondras71]

After a very long time I finished the hoof for the workboat.

I'm building this one according to the Zeehaen plan..











Prepared keel, stern post, stem and ribs..

 

[Ondras71]

I got over the "lean" period a bit and started working on the boat. The lower parts of the ribs are gradually ground, the horror, each part a different angle..









The ribs are gradually placed on the keel..







It's a bit like making another model..

 

[Ondras71]

Boat put away for a while, making anchors, another challenge..









Here, however, a larger burner than the one in the photo is used for heating..

 

[Richie]

Boat put away for a while, making anchors, another challenge..

View attachment 385017

View attachment 385018

View attachment 385019

View attachment 385020

Here, however, a larger burner than the one in the photo is used for heating..

View attachment 385021

View attachment 385022

View attachment 385023

View attachment 385024

View attachment 385025

Wow so good, don't need a ship just display the anchors.

 

[Uwek]

Very good and accurate metal works - Bravo!

 

[Ondras71]

Thank you very much Richie and Uwek!

Thanks for the like!

I weakened the vanes to 1.3mm according to the Zeehaen ship anchor plan, now better..



Polished with 00 steel wool and ready for blackening..

 

[Seagull Shipwright]

Inspirational. I like the plans, materials, techniques and the results. As a new modeller, something to aspire toward. I will watch with interest.

 

[DARIVS ARCHITECTVS]

PRECISION work!

 

[Uwek]

The anchors in the original colour "brass" are beautiful - but I guess with the good preparation they will be even better when they are blackened
I like the way you made them

 

[Ondras71]

Thank you very much everyone. Thanks for the like..

s blackened and wooden partitions made..







Result..

 

[shota70]

Thank you very much everyone. Thanks for the like..

s blackened and wooden partitions made..

View attachment 388073

View attachment 388074

View attachment 388080

Result..

View attachment 388075

View attachment 388076

View attachment 388079

View attachment 388077

View attachment 388078

Perfect anchors

 

[Mirek]

Piękna praca kotwice super .Pozdrawiam Mirek

 

[Uwek]

like shota wrote -> perfect

 

[Ondras71]

Thanks Shota, Mirek and Uwek, thanks for the like.

I hung the finished anchors on the boat. The bow has been properly strengthened..











I will also place the binding points on the bowsprit stump..

 

[Steef66]

Nice method

 

[Uwek]

The anchors are looking very good installed at the model -
I agree with Stephan about the method making the cleats - I have to remember this way next time

 

[Ondras71]

Thank you very much Stephan and Uwek.

Binding points laid on the bowsprit stump..









The ship is temporarily located in the museum in Rumburk as part of promotional events for the 2023 World Model Boat Championship in the Czech Republic. https://wchs-c-2023.eu/cz

 

[shota70]

Thank you very much Stephan and Uwek.

Binding points laid on the bowsprit stump..

View attachment 390532

View attachment 390533

View attachment 390534

View attachment 390535

The ship is temporarily located in the museum in Rumburk as part of promotional events for the 2023 World Model Boat Championship in the Czech Republic. https://wchs-c-2023.eu/cz

View attachment 390536

it's a great honor to your work and for the Museum to, well done

 

[Heinrich]

What a fitting display. A true museum-quality model in a museum! Well done and well deserved, Ondras!