-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering. -
SUBSCRIBE TO SHIPS IN SCALE TODAY!
The beloved Ships in Scale Magazine is back and charting a new course for 2026!
Discover new skills, new techniques, and new inspirations in every issue.
NOTE THAT OUR NEXT ISSUE WILL BE MARCH/APRIL 2026
Royal Louis 1780 Mamoli
- Thread starter nono318
- Start date
- Watchers 23
-
- Tags
- mamoli royal louis
IF this kind of thing matters to the model builder this is a good example where it is a good idea to check sources based on contemporary information to confirm if the kit is correct or not. There is also the issue of stacking boats. Do you or your followers have any examples of contemporary models or drawings that show boats stacked? From what I have read this was not done on English ships of war, but it may have been different for French ships. Some good questions for the team at the Musee de la Marine Paris.
Allan
- Joined
- Feb 3, 2023
- Messages
- 125
- Points
- 143
Sur le RL du musée de la marine, il n'y a pas les chaloupes.
J'ai déjà vu des kits de différents modèles avec des chaloupes empilées.
Maintenant, pour mon modèle, je n'ai pas fait de recherches historiques, à part pour les peintures, mais je me suis permis certaines libertés pour faire un modèle qui me plaît.
Je n'ai pas cherché non plus à faire un modèle sorti du chantier naval avec des peintures parfaites.
J'ai déjà vu des kits de différents modèles avec des chaloupes empilées.
Maintenant, pour mon modèle, je n'ai pas fait de recherches historiques, à part pour les peintures, mais je me suis permis certaines libertés pour faire un modèle qui me plaît.
Je n'ai pas cherché non plus à faire un modèle sorti du chantier naval avec des peintures parfaites.
- Joined
- Feb 3, 2023
- Messages
- 125
- Points
- 143
Merci Chris pour ces compliments , c'est vrai que pour les couleurs j'ai fait mes choix, ceci dit, je les ai choisies parmi les teintes utilisées à l'époque sur les navires.
Maintenant, je ne travaille plus sur le bateau, il ne me restait plus que les drapeaux à poser et c'était ma dernière construction car je n'ai pas de place pour les exposer .
- Joined
- Feb 3, 2023
- Messages
- 125
- Points
- 143
Il va falloir être patient, je dois refaire la pièce dans laquelle je dois, entre autre , exposer les maquettes, faire les vitrines etc.....
Donc, c'est pas pour demain.
- Joined
- Feb 3, 2023
- Messages
- 125
- Points
- 143
Petit coucou pour enfin terminé ce post.
Après avoir retapissé la pièce qui sert un peu à tout, bureau, ordinateur, machine à coudre etc.... j'ai fabriqué deux vitrines en sapin pour mettre 3 bateaux dont le Royal Louis.
Dans la vitrine verticale, il y a en haut le Puritan et en bas le Royal Caroline ( ma première construction ).
Après avoir retapissé la pièce qui sert un peu à tout, bureau, ordinateur, machine à coudre etc.... j'ai fabriqué deux vitrines en sapin pour mettre 3 bateaux dont le Royal Louis.
Dans la vitrine verticale, il y a en haut le Puritan et en bas le Royal Caroline ( ma première construction ).
Good morning. A very cool collection. Congratulations. Cheers Grant
Very impressive!
- Joined
- Dec 16, 2016
- Messages
- 1,233
- Points
- 493
Good morning, and again thanks for your likes and comments.
I’ve been quite busy working away on the model, I’m wondering where the hours spent have gone as the progress doesn’t seem to reflect the time that I’ve spent on it.
I’ve made up and fitted the rudder, it’s ply sheathed with walnut strip, the hinges are cast and I think are quite nice. I messed up and needed to make a second one. I made up and fitted the forward facia with the provided cast doors. I made and fitted the platform on the foredeck with the vents and capstan, I did this three times! The first time over the plan but when it came to fitting it the cut out in the ply decking was too large for the platform, it just fell through. I made the second using a different shade of strip which when in place looked at odds with the deck planking, I made sure that I got it right a third time. I made up and fitted the gratings, hatches and ladders for the main deck I made sure that I got them right this time. I cut out the upper deck gun ports and finished off the wall heights. During this I also started painting some of the surfaces, I think that you’ll get the idea of my colour scheme. More next time.
I’ve been quite busy working away on the model, I’m wondering where the hours spent have gone as the progress doesn’t seem to reflect the time that I’ve spent on it.
I’ve made up and fitted the rudder, it’s ply sheathed with walnut strip, the hinges are cast and I think are quite nice. I messed up and needed to make a second one. I made up and fitted the forward facia with the provided cast doors. I made and fitted the platform on the foredeck with the vents and capstan, I did this three times! The first time over the plan but when it came to fitting it the cut out in the ply decking was too large for the platform, it just fell through. I made the second using a different shade of strip which when in place looked at odds with the deck planking, I made sure that I got it right a third time. I made up and fitted the gratings, hatches and ladders for the main deck I made sure that I got them right this time. I cut out the upper deck gun ports and finished off the wall heights. During this I also started painting some of the surfaces, I think that you’ll get the idea of my colour scheme. More next time.