Santísima Trinidad by OCCRE [COMPLETED BUILD]

[sevish]

Hello everyone ,
This is my first post here.
It's my 2nd wood ship that i'm building.
I got this kit as commission build with the keel/skeleton already assembled,sadly he didn't kept gluing the Bulkheads straight so there is little warps with the deck when i assemble it.
I know i have some mistakes in my build, but i'm learning and doing my best to overcome and and evolve from those mistakes for me my future builds.
For this kit i'm in the start of the 8th month of building (started it in the end of October).
So there's lots of photo straight away.

Guy

 

[sevish]

So just after planking the hull of the ship my clint asked me to paint the ship and coppering the hull.
I did my best there.
And i fixed the painting afterwards

 

[sevish]

And the coppering begins
I used caldercraft 1/72 copper tiles .
The total quantity of tiles that i used was around 2100-2200.
I know my technic is not perfect and i made some mistakes in the process.
hopefully my next time will be more accurate.

 

[sevish]

After long process of the coppering the build continues, and this is the current state of the ship.

 

[Snowy]

Great build
She is a big girl
Can't wait to see her finished
Cheers snowy

 

[Jack Sparrow]

very impressive. Congratulations.

 

[sevish]

Great build
She is a big girl
Can't wait to see her finished
Cheers snowy

Thank you very much .
Guy

 

[sevish]

very impressive. Congratulations.

Thank you very much.
Guy

 

[WojtasS]

Nice progress. The copper plating upgrade makes a big difference

 

[sevish]

Nice progress. The copper plating upgrade makes a big difference

Thank you for your words.

 

[fred 44]

salut.tres beau travaille la coque est magnifique.

 

[sevish]

salut.tres beau travaille la coque est magnifique.

Thank you very much for your kind words

 

[shota70]

wonderful work, it's going to be great ship model

 

[GrantTyler]

After long process of the coppering the build continues, and this is the current state of the ship.

View attachment 375564

View attachment 375565

View attachment 375566

View attachment 375567

View attachment 375568

View attachment 375569

View attachment 375570

View attachment 375571

View attachment 375572

View attachment 375573

Good morning. The Spanish challenge to the Victory. Very impressive. The paintwork and your wales are excellent. I will pull up a chair here. Cheers Grant

 

[sevish]

Good morning. The Spanish challenge to the Victory. Very impressive. The paintwork and your wales are excellent. I will pull up a chair here. Cheers Grant

Thank you very much

 

[sevish]

Hello everyone ,
Advancing with my build , i focused on the 2nd deck completing it .
The 2nd deck design have flaws,
he ladders are stock ladders and not design specific for this ship. with the grit with the ammunition ,and the ladder from 3rd deck with the rails, the angle of the ladders from the 2nd deck to the main deck are wrong and the steps of the ladder are not horizontal to the decks.

3rd deck ladder




the ladders as appered in the instructions

after adding dye mix of sapelly and walnut thinned with water and coverd with oak dye


the sopport beams for the service boats

and the final result.

In addition i started to work on the base with the wuthe the connection for the LEDS



Working next on the officer gallery

Cheers
Guy

 

[GrantTyler]

Hello everyone ,
Advancing with my build , i focused on the 2nd deck completing it .
The 2nd deck design have flaws,
he ladders are stock ladders and not design specific for this ship. with the grit with the ammunition ,and the ladder from 3rd deck with the rails, the angle of the ladders from the 2nd deck to the main deck are wrong and the steps of the ladder are not horizontal to the decks.

3rd deck ladder
View attachment 376312

View attachment 376313

the ladders as appered in the instructions View attachment 376315

after adding dye mix of sapelly and walnut thinned with water and coverd with oak dye
View attachment 376314

the sopport beams for the service boats View attachment 376316

and the final result.View attachment 376317

In addition i started to work on the base with the wuthe the connection for the LEDS
View attachment 376318
View attachment 376319View attachment 376320

Working next on the officer gallery

Cheers
Guy

View attachment 376317

Good morning. Everything is very effective, the canon balls, lighting and colour contrasts. I like it loads. Cheers Grant

 

[WDO]

wow, that is looking great. Can't wait to see it finished.

 

[mtdoramike]

This is one of my all time favorites and you are doing her proud. Wonderful job on the planking and laying of the copper plating. Superb.

 

[Donnie]

Very nice - love the lighting effects.