The ALFRED 74. [COMPLETED BUILD]

[BLD SHPS]

A beautiful build I dont think I can ever reach that level.

 

[Kevink]

Just checked and yes i have all 6 books. I also have the plans somewhere.

 

[Woronora River]

Hi Brian,
What's your opinion on Huon pine for model ship building?
I have some that I have used before- mostly internally to pack between bulk heads or to be totally painted over.
My pieces seem to have grain that is too pronounced to be displayed.
Just noticing the grain on your planks are a lot finer than the timber I have.

G’day John.
Greetings from Coffs Harbour. I have been building plank on frame ships for nearly 40 years and using Huon Pine for nearly all that time. The problem grain you have is on two surfaces of a piece of plank. If you look at the adjacent surface grain you will see it is a much finer grain more comparable with the scale you are using. You will also appreciate the (bending) qualities. Just soak the end you need to bend in some hot water - it will almost tie in a knot.

Attached are some pics of the Batavia (1629 wrecked off WA). The hulls are all Huon Pine. If I have friends passing through Tasmania I get them to pick me up a short piece from a timber yard there. Aus$25?

If you want to talk to me my number is 0458534148.

 

[Eddy Stevens]

Gooday Brian
I am recently new to the forum and have noticed your knowledge of ship building
am wondering where you get your kits from are they from Aus or overseas can you advise me where is the best place to buy models and after sales components to our hobby
I am from W,A and we are very limited to our hobby shops here
Look forward to your reply
Eddy Stevens

 

[AllanKP69]

If you want to talk to me my number is 0458534148.

Just a word of caution, based on experience of others, posting phone numbers on the public forum is probably as bad an idea as posting an email address. Do not be surprised if you get a spike in junk texts and/or calls. PM is safer.