Vasa - 1:65 DeAgostini [COMPLETED BUILD]

dockattner said:
Happy New Year Everyone!

While I patiently wait for linseed oil to 'set' and less patiently wait for a shipment from Russia, I worked on other aspects of my build. First up was the completion of the stepped planking at the aft of the ship and the frightening experience of applying color to my model. Here is my work product:

View attachment 202818

View attachment 202819

Like everything else I try to do this seemingly simple task was harder and took far longer than anticipated.

I will need to extend the painted portion onto the hull a bit (and paint a raised sidewall to the fore of the ship) but I want to wait until I see where some trim pieces land as well as the galleries. Color can't come off - it can only go on...

By the way, in other Vasa models this red portion was often done in blue. That was the thinking at the time those models were built (or the personal preference of the builder) - but there is now evidence that red was the color used.

I also began the process of detailing the hull. First, I added some simulated nails around the gun ports:

View attachment 202820

View attachment 202821

For the record, I am not bad at keeping things in a straight line (I'm an orthodontist after all) - the unruliness was intentional if not a bit overdone.

To get a sense of what I was shooting for - here is a gun port on the real thing...

View attachment 202822

My plans for detailing the hull remain unclear in my mind. I'm going to add nails in stages until I think I have captured the right look - or at least my version of the right look.

Thanks for stopping by - your comments and suggestions are more than welcome!
Click to expand...
May I ask what you used to simulate nails? Several years ago, when I was trying to "super-detail an HO scale railroad car, I found a company that makes various types of nuts and bolts, round, square, hex, many with simulated washers in N< HOm O and G scale

1740834328742.jpeg
Very hard to tell from this photo. I did get some previously and they were very good quality, if I remember correctly. It would appear that it is still in business: https://www.tichytraingroup.com. I have reached out via email to verify this. If it is, I will post a follow-up to that effect.
 
dockattner said:
Friends,

Here are some photos of my completed Vasa. I hope you enjoy revisiting this model. I have such wonderful memories of the ways you helped make this build a success. My thanks and appreciation.

View attachment 353087

View attachment 353088

View attachment 353089

View attachment 353090

View attachment 353091

View attachment 353092

View attachment 353093

View attachment 353094

View attachment 353095

View attachment 353096

View attachment 353097

View attachment 353098

View attachment 353099

View attachment 353100

View attachment 353101

View attachment 353102

View attachment 353103

View attachment 353104

There are about 70 photos in total and for those interested I am providing a link to where I have them stored: Kattner Vasa Complete
Click to expand...
Beautiful ship, excellent detail! Magic Mike
 
mxs said:
Beautiful work by the original poster. I am speechless.

It’s just too bad, that it’s pretty much impossible to buy the same kit as a full kit. I can see some countries offering it, but only as a per month subscription.
Click to expand...
There are companies that offer this as a full kit, Corel being one and its not subscription (Model Expo). You might also check Cornwall Models.
 
ubjs said:
artesanialatina.net

Artesanía Latina

Shop powered by PrestaShop
artesanialatina.net artesanialatina.net

Corel, stay away from that one, not correct.
Billing boats kit is better but not at all as good as Artesania Latina.
Click to expand...
I agree. After working on Corel's so-advertised HMS VICTORY, cross section, I have learned a lot about scratch-building, reference-seeking, error correction, build log-reviewing, and how Corel could have made a much more accurate model. Building this version will be a fun challenge.
 
uncchains said:
I agree. After working on Corel's so-advertised HMS VICTORY, cross section, I have learned a lot about scratch-building, reference-seeking, error correction, build log-reviewing, and how Corel could have made a much more accurate model. Building this version will be a fun challenge.
Click to expand...
I started building Corel's Victory kit, got as far as the gun ports, realized what a poor kit it was, abandoned it, & eventually sold it for something like £50. Billings' is also a poor kit - NO WALES!
 
You must log in or register to reply here.
Back
Top