You may want to try something like this? They have many others, probably metric also at reasonable prices. Check out Harbor freight also, if there is one near you.
Last edited:
-
LUCZORAMA SHIPWRECK SCAVENGER HUNT GIVEAWAY. 4 Weeks of Fun • 1 Legendary Prize ((OcCre’s Fram Ship)) • Global Crew Welcome!
**VIEW THREAD HERE**
What tool
- Thread starter Ted Robinson
- Start date
- Watchers 11
- Joined
- Jun 29, 2024
- Messages
- 1,002
- Points
- 393
Those punches have square tips. They are intended to be used to punch out pins holding parts together. They will not work as center punches. I suppose you could try to grind a point on one.
Roger
Roger
I prefer to sandwich the brass between a couple of pieces of wood then drill the hole instead of using a punch to avoid stress and bending....
- Joined
- Jun 29, 2024
- Messages
- 1,002
- Points
- 393
Duco Cement, the old fashioned model airplane glue that comes in a tube, is great for temporarily gluing sheet brass to wood. I also keep inexpensive craft plywood on hand for this purpose. I run this brass/plywood laminate through my Byrnes saw to cut distortion free strips.
Phil’s drilling trick sounds like a good idea.
Roger
Phil’s drilling trick sounds like a good idea.
Roger
those are nail sets used as countersinks... not center punches.
- Joined
- Oct 1, 2023
- Messages
- 1,590
- Points
- 488
That sounds like a good idea.
I'm going to use it when I start on the deadeyes shortly.
Buy this scribbler, for marking on brass, the very thing you need is a very sharp, and solid tip.
Смотри, что есть на AliExpress! 1 шт. наконечник из вольфрамовой стали, двухсторонний острый чернильный карандаш, инструменты для разметки керамики, стекла, корпуса, металла за 240 ₽ - уже со скидкой -30%
Смотри, что есть на AliExpress! 1 шт. наконечник из вольфрамовой стали, двухсторонний острый чернильный карандаш, инструменты для разметки керамики, стекла, корпуса, металла за 240 ₽ - уже со скидкой -30%