current build images Your actual Ship Modeling Project - briefly introduced at a glance -> present it here

[garcianacho]

Getting back to the Polaris.
I left it for a few months to do an easier one, the Bounty from Amati first steps. Now I have finished the Bounty, with many mistakes but I have learned something from all of them, and I am going to get back to the Polaris, which also has many defects, but now I know how I am going to fix them.
By the way, I'm showing you a small piece I made on my 3D printer to bend the slats.
Greetings!

PS: I invite you to find a single photo of the Amati first steps Bounty with the sails on, like mine... There isn't one!!

 

[olemale]

 

[Francois de Saint Nazaire]

Hello,

I started building the HM Granado bomb vessel (Jotika/Caldercraft, 1:64 scale) 18 months ago. The final step will be adding the anchors.

It's a very good kit

 

[Norgale]

On the Harvey plan above , every dimension on the page is in Millimeters. I get sick of looking every measurement up to build the boat.

 

[Uwek]

Hello,

I started building the HM Granado bomb vessel (Jotika/Caldercraft, 1:64 scale) 18 months ago. The final step will be adding the anchors.

It's a very good kit

View attachment 485839

View attachment 485840

View attachment 485841

View attachment 485842

you make a very good Granado - very good work

 

[ROUGHLY MARTIN]

This is a first post to see if it works out ,as this seems to be my preferred site.
Somehow I've managed to get two ships to the same stage at the same time, so looks like a busy rigging winter.
Long project christmas gift, Cutty at 1/115 base Constructo, And the "Anne of Flowers" 1/75 Elisabethan fantasy scratch galleon base work of Kirsch (for my old mum, Elizabeth Anne) which somehow snuck in and took over !

 

[Corsair]

They look great !

 

[ROUGHLY MARTIN]

They look great !

Haha ! That's just the sunshine.
thanks Jeff.

 

[Captain B]

One of three builds I’m working on at the present is a river boat from the early 1800’s used in France. When completed It’s going to be displayed in a pet shop owned by a friend. The crew consists of pets, as I can get them carved. And of course the owner, Capt. Kurt Here’s the crew I’ve recruited so far. Except the tiny cockatiel I planed to put at the end of the yard. I guess he’s hiding.

 

[Osaul]

Bonhomme Richard, stern is finished.

 

[Dubz Modelling World]

Some progress

HMS Druid 1776 stern cross section in scale 1/128 by Dubz Modelling World

I started something new and small .... HMS Druid 1776 stern cross section in scale 1/128 I bought it years ago very cheap and just and found it in my stash recently. The manual is a bad printed joke but there are some helpful buildlogs around :-) Unfortunately, one thing I notice again and...

shipsofscale.com

cheers

Dirk

 

[Captain B]

Sail raised on Le Martegaou.

 

[Osaul]

Bonhomme Richard, upper deck is ready.

 

[Captain B]

Le Martegaou has left the Shipyard for her permanent home.



















The boat is being displayed in a pet shop. That’s what’s up with the 10 dogs, 2 cats, 1 bird and captain Kurt the owner.

 

[Francois de Saint Nazaire]

Hello,


The Trabaccolo (MarisStella - 1:32) is currently in progress.

The model's interior is more or less finished.

The next step will be the outside planking.

Fore room for the crew



Aft room for the boss



Ship's hold

 

[Jay-Anchor]

Made some rope coils and working on finishing the ratlines over the weekend.

 

[MDB]

my first ever build HMS Beagle

 

[Bobby K.]

My Astrolabe 1812, port side foremast rigged ratlines and stays.

And the kit supplied Lion figure head.



And my good friend @GabeK made me this lion figurehead It is fantastic. Thanks.

And this is how she sits today.



Bobby K

 

[Dragdonius]

Good day
Below some progress on my Santa Maria by Pavel Nikitin




It was difficult and frustrating buil so far. Starting from very chaotic instruction, you need to constantly check back and forward. Some pieces are not numbered, some are numbered but missing from kit - like foredeck support beams.
There are four copies of each whale planks but instruction showing you need to double only. I used three on main whale.
Decks planks are generally to narrow - even in Pavel's video he need to make some from scrap wood.
The left/right markings are generally swaped but some parts are marked correctly.
I've got some parts that are not showed either in instruction or on the plans.
there are not tolerance for any mistake or over sanding. The subassemblies to narrow or to short compared to the shape of the hull.

For that I promoted myself to scratch builder level 2
But I think I need break from the model not to end up in the bin

 

[Francois de Saint Nazaire]

Beautiful model, your garden is also so pretty