Has anyone had any luck translating the instructions into English? I have tried Google Translate several times and it is still in Chinese?
-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
1/24th scale POF 36' French Longboat, Cherry wood version from Unicorn
- Joined
- Jan 25, 2023
- Messages
- 405
- Points
- 238
Probably because there is no "text" in the instructions, just an image of text. It's like they took a picture of the text. The computer doesn't recognize it as text. I use the google translate phone app, you can use the camera to get a live translation or take a picture and it'll translate that.
- Joined
- Sep 10, 2024
- Messages
- 641
- Points
- 308
I've started on it. I only have a page or two done due to time constraints. I'm at work now (don't tell my boss) and what I have done is on my home laptop. If you are at a particular spot and need a quick translation, give me the page and photo #s and I'll translate them for you.
I did the full translation for Unicorn's 1:160 Enterprize stern section and Zoly posted it on his site. My goal was to do this one and the upcoming midsection, but household duties have taken my time and it hasn't been a high priority. However, perhaps with some motivation ... Unicorn, are you listening?
This is your defense?
- Joined
- Sep 10, 2024
- Messages
- 641
- Points
- 308
- Joined
- Jan 25, 2023
- Messages
- 405
- Points
- 238
In my defense, don't you think 'I' should be forward and 'II' should be reverse?
Onward and upward. I drilled out all the nail holes.
I didn't intentionally drill through, I just needed a little extra depth for the CA to grip the brass better, but it did happen some.
Pour one out for the homies we lost along the way.
And yes, I did drill into my finger at least once.
I also received the gun and cradle assembly that was missing from the kit. I am not sure if I'll use it for this one, I think I want to do sails with this one and the gun for the pear wood version. But I will find a use for this somewhere, maybe a small vignette.
Onward and upward. I drilled out all the nail holes.
I didn't intentionally drill through, I just needed a little extra depth for the CA to grip the brass better, but it did happen some.
Pour one out for the homies we lost along the way.
And yes, I did drill into my finger at least once.
I also received the gun and cradle assembly that was missing from the kit. I am not sure if I'll use it for this one, I think I want to do sails with this one and the gun for the pear wood version. But I will find a use for this somewhere, maybe a small vignette.
Last edited:
- Joined
- Oct 1, 2023
- Messages
- 1,660
- Points
- 488
Looking good. I can't wait to get out of this COVID rehab facility and start back on my model.
, I'm probably being overly sarcastic and reductive. Being a man and a father, I feel the need to be stoic and not really emotive so I hide behind humor. In all honesty, I am really enjoying this, even if it feels a bit tedious sometimes.
- Joined
- Jan 25, 2023
- Messages
- 405
- Points
- 238
Finally finished putting the nails in. I am using Bob Smith Extra Thick and just putting a blob down on a palette and dipping the ends of the wire in it, before inserting them. The CA glue says 10-25 seconds cure, but I can leave a small blob on the palette for 1/2 an hour or so without it losing any viscosity.
The last 7 frames will be hidden (something I didn't think about until I had already drilled them) so I can refrain from putting nails there, but I wonder if I should do some anyway just for the added structural benefit. Sanding the outside is gonna put a lot of stress on the frame, nailing the last seven frames could help, or it could hurt in some ways.
Next up, gotta figure out how to grind the nails closest to the keelson without gouging any of the decking or keelson. then I need to figure out how to sand everything down without destroying my entire stock of sandpaper. Then I need to figure out how to blacken them in situ.
The last 7 frames will be hidden (something I didn't think about until I had already drilled them) so I can refrain from putting nails there, but I wonder if I should do some anyway just for the added structural benefit. Sanding the outside is gonna put a lot of stress on the frame, nailing the last seven frames could help, or it could hurt in some ways.
Next up, gotta figure out how to grind the nails closest to the keelson without gouging any of the decking or keelson. then I need to figure out how to sand everything down without destroying my entire stock of sandpaper. Then I need to figure out how to blacken them in situ.
Just got my pearwood version of this kit. First look - very happy with the quality of the wood and other material. And the plan sheet will do for rigging as it looks quite complete - and unlike the instructions, the plan sheet has English text on it.
Thank you Rob, for vetting this kit.
But first - I have to finish rigging my Vanguard Models HM Sherbourne ...
Thank you Rob, for vetting this kit.
But first - I have to finish rigging my Vanguard Models HM Sherbourne ...
Last edited:
- Joined
- Jan 25, 2023
- Messages
- 405
- Points
- 238
Whew, that was a rough one.
Getting rid of the nubs of the brass wire after gluing them in was pretty rough. I tried everything in my arsenal and then some and it was just kicking my posterior. I finally got these today in an effort to combat them. The flapper wheels were useless, too short to flap they ended up just being a worse drum sanding bit. But then I tried the other one and finally!
This thing at a halfway decent speed made very quick work of them. Chewed them right down tot he wood. I did scuff a couple spots deeper than I would have liked so I must get better at using it, but all in all I am glad to finally be done with the inner nails. The outer ones should not pose nearly as much problem as they will be far easier to reach.
When I finished I practiced making trennels. I still need more practice, but last time I only made it down to the mid 40's and this time I made it to the low 30's.
The brass wire on the kit is .6 mm (.023"). I am not sure I can get all the way down to that, but I really don't want to use brass wire on the Swiss Pear one. This is maple out of an Occre kit I no longer want to build. I think it would contrast well with the pear. I think wood nails would simplify things hugely! It would so much easier to use a chisel to get rid of the nubs.
Getting rid of the nubs of the brass wire after gluing them in was pretty rough. I tried everything in my arsenal and then some and it was just kicking my posterior. I finally got these today in an effort to combat them. The flapper wheels were useless, too short to flap they ended up just being a worse drum sanding bit. But then I tried the other one and finally!
This thing at a halfway decent speed made very quick work of them. Chewed them right down tot he wood. I did scuff a couple spots deeper than I would have liked so I must get better at using it, but all in all I am glad to finally be done with the inner nails. The outer ones should not pose nearly as much problem as they will be far easier to reach.
When I finished I practiced making trennels. I still need more practice, but last time I only made it down to the mid 40's and this time I made it to the low 30's.
The brass wire on the kit is .6 mm (.023"). I am not sure I can get all the way down to that, but I really don't want to use brass wire on the Swiss Pear one. This is maple out of an Occre kit I no longer want to build. I think it would contrast well with the pear. I think wood nails would simplify things hugely! It would so much easier to use a chisel to get rid of the nubs.