• LUCZORAMA SHIPWRECK SCAVENGER HUNT GIVEAWAY. 4 Weeks of Fun • 1 Legendary Prize ((OcCre’s Fram Ship)) • Global Crew Welcome!
    **VIEW THREAD HERE**

74 Gun Vasseau by Jean Boudriot from Ancre'

So today went to dads and on the way dropped plans off for scanning. they did 7 sheets for me while I waited as I need them now, and the other 32 will be ready tomorrow. $117 to scan all 39 sheets in @$3 a sheet for scanning no matter the size then they email them to me as pdfs
 
got some more redrawing finished tonight. it is going slow as I am having to take dimensions off the original plan sheet and transferring them to my cad program as when you bring images into solidworks it pixellates them a little and makes them hard to be super accurate especially when dealing with folded paper which cant scan real straight.

That is why I wished all plan sellers would sell them rolled at least then you wont get near as much paper distortion. like frame parts crossing a fold in the paper . However its going good and they are staying very accurate it will just take a hair longer to get the keel correct as that sets up the rest of the ship. the frames will be easy as I can loft a lot of them so that I am sure to get a nice flow.
 
so today was a bust grandkids came to visit and my boy came and said here dad they wanted to visit then said bye ill pick them up later lol that was 2 pm it is 807 pm they just left. now the tedious task of marking out all the stations so that I can notch the keel and keelson accurately.
 
So I think I may need to start over as things aren't adding up.

I am using Plate 10 which is a cross section to draw up my keel etc. However the dimensions from that one aren't matching sheets showing just the front Parts and just the rear Keel and Keelson parts

I think there is a big difference in the drawings even though done at same scale. I think I will use the part sheets as reference that is why I wanted to draw things before I built it.

Also the known dimensions arent adding up with to what plate 10 is showing, thus I have decided plate 10 was just drawn up for reference and not to be used to take dimensions off.

I did use my drawings to create the false keel and keel in 3D just for fun.

74 Gun -25.png
 
So it didnt take me long to redraw the backbone at least the rough outlines still need to add the breaks for all the pieces. but I am happy now as I drew it from scratch using known dimensions instead of trying to trace the drawings. I think these been printed a while as the drawings are somewhat skewed and distored from humidity and other effects. I can tell from the differences in dimensions from one drawing to another.

74 Gun -28.png74 Gun -27.png
 
So had a slow night at work because of the weather so was able to get something done. I redrew all my keel parts etc so tonight I converted them to 3D. I still have the stern posts, Rising Wood, and the Upper Mid and Lower Aprons to draw and if work is slow tomorrow will try to get to them otherwise it will be sunday on my days off. once I get them and the transoms and the bow woods drawn up I will start Construction as I will have all my Backbones Drawn Up

74 Gun -29.png74 Gun -30.png
 
So this 74 has 6 filling transoms then deck transom wing transom and the top cap transom I cant remember the weird name they gave it. BTW all terminology I use here may not fully match with the British we used to. I am using the French term for it. For example the part that connects to tor keel and false keel the Brits call the gripe and the French call it lower stem. Also the hog or rising wood the French call false kelson. so as I go most will know the part, however they may know it by a different name.
 
Cant see sawdust until the parts are drawn accurately but probably start machining keel parts this weekend , aka my weekend is sun mon Tues, so yea I think I will use cherry for keel parts railings etc and Aspen for frames
 
You must log in or register to reply here.
Back
Top