HMS Alert [1777] 1:48 POF by serikoff. (Two hulls: skeleton and fully rigged)

[serikoff]

Since the lower deck will be practically invisible, the main parameter in its implementation is speed. Therefore, I made all the filling, as we say: “dendrophycal” method (excuse the expression) “from shit and sticks.”

That is, I used all the leftover materials, scraps and uncalibrated blanks. I did this so that there was more space for experiments with coating with oil and bitumen. I'm thinking of covering the hull with Rustins Tung oil, but with the deck either the same or Danish Rustins oil. I'll see how it all turns out under the bitumen.

So, I installed walls and imitation doors on fragments of the deck. I repeat! The location of the walls, the height of the deck itself and other elements may have errors (they will still not be visible). And there were no central walls near the mast at all (I installed them as a visor from the lighting that I am planning).



I made primitive stencils to create the outline of the doors, and scratched them with a needle.



























Oil coating is next... uh...

 

[serikoff]

So now comes the most interesting part – the oil coating.

It's not for nothing that I did all the things that won't be visible... I'll be experimenting with exactly all of this.



First, I polished everything with Borma Wachs 000 steel wool (a fantastic wool, all the varieties from 0000+, 000, and 00, highly recommended!!)

Then I made a special jig for applying oil. This was used by masters of the day who applied shellac paint and varnish to musical instruments, but the principle can be used here too.

The idea is not to coat the oil with a thick film with a brush, but to polish with at least a 1:1 ratio of oil and solvent (I use thinner for artists' oil paints, it's odorless).



I experimented with two oils at once (Tung and Danish oils from Rustins).

First, I dilute the oil in a separate container, then pour it onto wool threads or pieces of fabric and wrap them in cotton cloth, making a sort of teddy bear. This creates a marker effect. The excess oil is always inside the wool, preventing it from dripping, and the oil evenly saturates the wood through the cloth. If you notice less oil, simply press harder on the wool, and the cloth will become damp again, but not dripping wet.

This method isn't very convenient in corners (there, it's better to use a damp, but not wet, brush with oil diluted more than 1:1)... and it's better to use it on larger surfaces... but since I was simulating the effect by applying it to the upper deck, I did it this way. Apply along the grain with a buffing motion, then wipe off any excess with a paper towel.

And here are the results:









It's hard to tell the difference in the photos, but Tung's color is more brown and rich, and therefore darker. Danish's is lighter (like a faded color), but it's a cool beige. My wife, like me, liked the result of Tung's, even though it's darker, which isn't ideal for a deck. But the issue with the pear wood... it'll be dark anyway, and how dark it is isn't that critical.

Now we'll wait a month and see what happens, and then in a month I'll coat it with bitumen. Speaking of which, I used Idea Patina 710 before, but it's difficult to work with. It's thick like resin and needs to be thinned with solvent, but the problem is that it's impossible to calculate the proportions, and that's definitely not the case with it.



The one I want to try (Antique Bitumen) is already liquid, and you can calculate exactly how much you need and how much solvent, which is convenient. Incidentally, it's from the same company as the steel wool. There's also Antique Patina from the same company, but from the video review, I realized it's not brown, but more of a gray tone. That's not quite right, since I want a dark, dark brown, not a dark gray. Anyway, I'll show you the results in a month.

 

[serikoff]

When I don't like something... I just can't leave it as is.

Three days of construction - in the trash... I removed every bolt I had installed from the hull...



I pulled some out with wire cutters, and hammered or knocked some out of the case with a sharpened file.

And here's why I removed the brass bolts:

1. The color bothered me... brass is yellow (I don't understand why I chose that). The bolts were bronze, and what looked like bronze... copper. I thought about blackening the brass, but it's better to patinated the copper, which will look more authentic.

2. Because the boards were glued to plastic, the fixation was weak, and the bolts started falling out of the holes. Not all of them, just a few, but that's a bad sign... it can happen at any moment. This method is only good for solid wood, not plastic.

3. The bolt head repeatability also left much to be desired... It looked good on the test pieces, but on the case, I didn't like the result.

4. Not a major factor, but a significant one: it was very inconvenient to cut the brass wire on the body, and drilling with a drill bit on the body is also very dangerous, as it can damage the boards. Overall, this method is good, but time-consuming.

And now I'm back where I started...



... I polished the case with steel wool and started again.



Tip: To make a smooth piece of wire, place it on a flat plate and slide it over it so that it rotates between the plate and the table.



This principle is used for cutting and shaping bolts. Place the plate and knife on a SOFT copper wire and slide it back and forth so the wire rotates. With several passes, the knife (not sharp) cuts off a piece of the wire, creating an expansion zone at the edges.



A zone similar to the bolt axis forms on the end face. If you cut this blank with nippers, you'll get two bolts.

In just a few minutes, you can make five blanks, or 10 bolts, which is very fast.



Then I simply insert the bolt into the hole, and it wedges due to the flare at the end, which is a huge plus! After that, I use a burr (by hand) to adjust the shape of the bolt head. Since copper is soft, this is easy to do, very quickly, and without a machine, without the risk of damaging the hull.



Well, here is the result.



As I mentioned, I plan to patinated the bolts to give them an aged effect.





The shape still isn't quite what I'd like, but it's very close, and that's the main thing!

1. There's a fair amount of repeatability.

2. The bolts don't fall out and hold well.

3. I really like the color; it's just... brass just doesn't cut it.

So ahead lies the production and fixing of 100,500 bolts... again.

 

[dockattner]

Respect.