HMS Bounty 1:48 Made to Harold Hahn Plans

[lesterpalifka]

Port top plank for the bow all formed starting to fit it to the ship. Also working on the flag locker at the stern

 

[lesterpalifka]

Bow top planks installed…

 

[lesterpalifka]

Deck planking finished except where railing posts are located bow planking and inside bow planking done. Location of fore companion way and main hatches located. She is starting to look like a real ship

 

[lesterpalifka]

Starting some trim and deck fittings

 

[lesterpalifka]

Port side railing completed and installed

 

[lesterpalifka]

Railings are done windless and stove pipe are dry fitted….

 

[lesterpalifka]

Railings are done windless and stove pipe are dry fitted….View attachment 263747View attachment 263748View attachment 263749

 

[Uwek]

Looking good - maybe take one more look at the windlass, which should be in the center with some notches or minimum octagonal sanded, so that the stopper can work. in moment it has still a round cross section



from the Anatomy book

 

[lesterpalifka]

Looking good - maybe take one more look at the windlass, which should be in the center with some notches or minimum octagonal sanded, so that the stopper can work. in moment it has still a round cross section

View attachment 264863

from the Anatomy book
View attachment 264864

View attachment 264865

I know i just havent gotten that far with it to finish...i will be putting the stops in later...

 

[lesterpalifka]

making more parts.....

 

[lesterpalifka]

Adding bow bollards dry fitting other parts. Notice I put the grooves in the center of the windless

 

[Uwek]

Hallo,
just one small comment - you have to turn the smokestack by 180° - The opening is everytime with the wind.....

 

[lesterpalifka]

Hallo,
just one small comment - you have to turn the smokestack by 180° - The opening is everytime with the wind.....

i know was just putting it on the deck
when i glue it on it will be right

 

[lesterpalifka]

More work done on Bounty

 

[lesterpalifka]

.

 

[Uwek]

View attachment 271660View attachment 271661.

I am not sure that I understand, what you wanted to show us with the last post - maybe you explain shortly

 

[lesterpalifka]

I am not sure that I understand, what you wanted to show us with the last post - maybe you explain shortly

These are drawings I am making to build a 1/48 scale launch based on the 1/16 scale model by model ship yard. It will be a model within a model. I took had the shipways plans scanned I then inserted the . JPEG into the auto cad drawing and traced all the parts I need to make to build the 1/48 scale launch. I am a retired mechanical engineer and have used cad for 45 years. I also have 3D cad….

 

[lesterpalifka]

Starting to do the launch from the plans I re.drew. Will be fairly detailed based on the 1/16 model I made.

 

[shota70]

Starting to do the launch from the plans I re.drew. Will be fairly detailed based on the 1/16 model I made.View attachment 274698View attachment 274699View attachment 274700View attachment 274701View attachment 274704View attachment 274705View attachment 274706

great progress and very accurate work, it's looks beautiful

 

[lesterpalifka]

great progress and very accurate work, it's looks beautiful

thank you so much