- Joined
- Oct 17, 2020
- Messages
- 1,465
- Points
- 393
Good evening, I ask, I don't see the eyebrow,
-
Beginning at 5:00AM PST (13:00 UTC) on Friday February 14th, all services in the Los Angeles, California, USA Data Center will be offline to perform a Data Center Migration. Due to the nature of this migration, we anticipate up to 24 hours of downtime to safely complete this work. Please be patient during this time and thank you for being a valuable member of our community.
HMS Euryalus 1803 - Scale 1:48 [COMPLETED BUILD]
- Thread starter Lucius
- Start date
- Watchers 62
-
- Tags
- 1803 completed build euryalus
patience, patience
Hello Everyone,
after the carlings it was time for the frames for the hatches and stairs. These were then adjusted and glued to the upper deck
to be continued
Oh,one more thing. I now have a small anniversary to celebrate. 2 years ago I started building the HMS Euryalus. Unfortunately, now the pictures of the construction are no longer posted so quickly, because I am now building in real time. I hope you have enough patience to wait for it.
Greetings
Lucius
after the carlings it was time for the frames for the hatches and stairs. These were then adjusted and glued to the upper deck
to be continued
Oh,one more thing. I now have a small anniversary to celebrate. 2 years ago I started building the HMS Euryalus. Unfortunately, now the pictures of the construction are no longer posted so quickly, because I am now building in real time. I hope you have enough patience to wait for it.
Greetings
Lucius
Hello Everyone,
this is the work of the last 2 days. Deck beams and the knees in the forward section of the stern area.
to be continued
Greetings
Lucius
this is the work of the last 2 days. Deck beams and the knees in the forward section of the stern area.
to be continued
Greetings
Lucius
wunderschöne Arbeit - wonderful work
Hello Everyone,
this is the work of the last 2 days. Carlings, Carlings, Carlings.............
to be continued
Greetings
Lucius
this is the work of the last 2 days. Carlings, Carlings, Carlings.............
to be continued
Greetings
Lucius
Last edited:
I can only marvel at Rüdiger, working so precisely and cleanly, it's nice to see a ship grow like this.
These are not only carlings - also the joints with minimal gaps - fitting extremely good and accurately oriantated
Hello Everyone,
It is always nice when you enjoy working on my model. Many thanks for your appreciation and praise.
Greetings
Lucius
It is always nice when you enjoy working on my model. Many thanks for your appreciation and praise.
Greetings
Lucius
Hello Everyone,
This is yesterday's work. ladder and grating on the Main Mast
to be continued
Greetings
Lucius
This is yesterday's work. ladder and grating on the Main Mast
to be continued
Greetings
Lucius
Hello Everyone,
this is the work of the last 2 days. The Capstan
to be continued
Greetings
Lucius
this is the work of the last 2 days. The Capstan
to be continued
Greetings
Lucius
Indeed a very good work - I like the details like the top iron ring for the small bolts - great detail my friend
Hi, everyone,
The pumps part 1
the work of the last 2 days. The pump housings for the chain pumps were built and assembled.
to be continued
Greetings
Lucius
The pumps part 1
the work of the last 2 days. The pump housings for the chain pumps were built and assembled.
to be continued
Greetings
Lucius
- very good way to make them - Bravo
Hello everyone,
the Pumps Part 2
to be continued
Greetings
Lucius
the Pumps Part 2
to be continued
Greetings
Lucius
Hello everyone,
the Pumps Part 3
The brackets are made of brass wire 1.0 mm. The sleeve consists of brass tube 1.2 x 1.0 mm. It was soldered with Bengs silver solder paste. Blued with Aluminum Black by Birchwood Casey (is better than Brass Black)
to be continued
Greetings
Lucius
the Pumps Part 3
The brackets are made of brass wire 1.0 mm. The sleeve consists of brass tube 1.2 x 1.0 mm. It was soldered with Bengs silver solder paste. Blued with Aluminum Black by Birchwood Casey (is better than Brass Black)
to be continued
Greetings
Lucius
Hello everyone,
the Pumps Part 4
Everything is assembled and the pump section is ready. I leave the starboard side like that
to be continued
Greetings
Lucius
the Pumps Part 4
Everything is assembled and the pump section is ready. I leave the starboard side like that
to be continued
Greetings
Lucius
your work on the pumps is looking very good. Bravo
You show us the "Alumium Black" from Birchwood.
Is is blackening either the brass wire with the solder (Lötzinn) ?
I have sometimes problems with "Brass Black" or the similar product of Balistol, that the brass is getting black, but not the solder....
You show us the "Alumium Black" from Birchwood.
Is is blackening either the brass wire with the solder (Lötzinn) ?
I have sometimes problems with "Brass Black" or the similar product of Balistol, that the brass is getting black, but not the solder....