Very nice, indeed!
-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
It's done! The more than 1,200 knots on the first floor are knotted, all shrouds have their required rat-lines. 
When I then grabbed the camera to capture everything in the picture, jumped my three best Topmaaten, these media hot guys, immediately in the shrouds.
, they're on the pictures again. 
So, here comes eye food for you! And Lucky Jack also enjoys my ship. (Even if he does not show it that open - but I know him well, you know ...
)
And as always: sorry for terribly sounding English - I use the Google Translator ... I just hope that it becomes clear what I wanted to tell you.
When I then grabbed the camera to capture everything in the picture, jumped my three best Topmaaten, these media hot guys, immediately in the shrouds.
, they're on the pictures again. So, here comes eye food for you! And Lucky Jack also enjoys my ship. (Even if he does not show it that open - but I know him well, you know ...
)And as always: sorry for terribly sounding English - I use the Google Translator ... I just hope that it becomes clear what I wanted to tell you.
The rat-lines are all set, and I thought you like it when I'm doing a photo shoot with my pretty one. Here's a little sample. It would be nice if you would visit me on my website:
https://www.karton-im-wind.de/nicht-von-pappe-doch/hms-mercury/webleinen/
https://www.karton-im-wind.de/nicht-von-pappe-doch/hms-mercury/webleinen/
This is a Beautiful build, Absolutely amazing
@Bonden Yes he did!!
I present you the first demolition action of the new year! But see for yourself: The two round logs (in German: Butluvspieren, in English ???) do not have the same height. And by attaching the rat-lines, I accidentally pulled it, and you see, that would not last much longer.
So away with it!
Now you can look the Mercury in the eye again.
So away with it!
Now you can look the Mercury in the eye again.
Repair didn't last long and was successful! 
- Joined
- Jul 22, 2017
- Messages
- 331
- Points
- 268
Hey Brother,
Excellent job at fixing the, "Boomkin". You are correct as well Sir, in that now you can look at her in the eye. Its like a female co-worker I work with, being cross-eyed, I don't know which eye to look at so I just stare at her nose when I talk to her. Yes I know, there is a special place for me in hell. LOL
Raymond
Excellent job at fixing the, "Boomkin". You are correct as well Sir, in that now you can look at her in the eye. Its like a female co-worker I work with, being cross-eyed, I don't know which eye to look at so I just stare at her nose when I talk to her. Yes I know, there is a special place for me in hell. LOL
Raymond
Hello everyone, there has been a lot happening on my shipyard in the last few days. I'm just worried that the Google Translator does not manage to translate that meaningfully, which I have everything to report. I just show you my pictures and hope they are self-explanatory. There was a problem with the back stays. The construction manual showed only one standing back stay, but it must be two. One for the topmast, one for the topgallant mast. and the "flying back stay" also needs to be grown. So I had the little channel - stool? - tear down and build a new one. But now everything is as it should be.
The stag is also attached; the top mast of the mizzen is now almost complete. I'm about to install the rat-lines. I will show that tomorrow.
The stag is also attached; the top mast of the mizzen is now almost complete. I'm about to install the rat-lines. I will show that tomorrow.
Yay!!! Jimsky and Jimmy are back!! Man, you must have tons of patience doing such grate, historically accurate rigging job.
Patience? I? When the patience was distributed, I was cursing in a traffic jam!
So, today Jimmy was also allowed to test the other side.
I was busy again. I have attached the shrouds of the topmast of the mainmast. My ship is getting higher and higher. Tomorrow I will take care of the back stays.
Hello everybody, I want to get in touch with some news. The back stays took more time than I thought. But now the topmast of the mainmast is ready. And also the stays are fixed. And as always there is something to look at:
Very good standing rigging - Great details