• LUCZORAMA SHIPWRECK SCAVENGER HUNT GIVEAWAY. 4 Weeks of Fun • 1 Legendary Prize ((OcCre’s Fram Ship)) • Global Crew Welcome!
    **VIEW THREAD HERE**

Hms Victory by Caldercraft

No.. it was at Spithead - giving a salute I suspect. Spithead is the area of the Solent between Portsmouth and the Isle of Wight and where fleet reviews were/are traditionally held by Royalty etc.
 
Hey guys,

Maybe this will help:

Colour design in the 17th century depended on how cheaply they could be obtained. This also meant that they had to be easy to produce. The most expensive colours were primarily ultramarine, purple and a rich, permanent black, which was very difficult to produce. These colours were very expensive due to their natural sources or complex production and were regarded as status symbols. I.e. the nobility or, depending on the case, prestigious, expensive warships. However, it should not be underestimated that the colours were not particularly durable, so they faded very quickly.

At sea in particular, salt water and the sun were hard on the colours or the colour gradient and the ships almost always had to be touched up. In other words, it's quite possible that ochre looked like pig pink afterwards. I don't like it either, but it sounds logical. I love there bee maya look. But I think it's more out of necessity and use that it didn't look quite as colourful as it does now in Portsmouth. I even thought I read that Nelson really did change the colour to distinguish it from the French-ships. But in the end, this is all speculation. The artists' interpretation is also always questionable, as they had to make a living from selling their work. I think we model makers have to differentiate between whether we are building historically and scientifically accurate models or whether we are doing a bit of artistic work. The fact is, we build beautiful ships, don't we?

Explanation:

Ultramarine:

This bright blue was extracted from the gemstone lapis lazuli, which made it very expensive.

Purple:
Purple, a red-violet colour, was extracted from the glands of purple snails. The complex extraction process made this colour very expensive and exclusive.

Black:
A rich black colour for textiles was not easy to achieve in the 17th century. It required a combination of different substances and repeated dyeing to achieve a permanent colour.

Other colours such as red, white and some earth tones (such as ochre or umber) were more accessible and were therefore used more frequently. However, depending on their purity and intensity, these colours could also be expensive, especially if they were needed for the nobility or to produce high-quality works of art.

Best regards
Günther Ship-1
 
Hi Everyone, love this discussion as I too am build my Caldercraft Victory. From a few paintings I looked at it I too believe the gun port lids were also the yellow ochre (whatever shade that might be).

I will put paint the gunports yellow ochre and have them closed. I like the closed look, maybe just on the port side. Question, would the gunport lids hardware be black or would they too be painted yellow ochre.

Any thoughts?

Thanks Grant
 
Hey Guys,

I always think the discussion is great. But you shouldn't forget the circumstances that played a role in the colour scheme. It was simply a question of cost. Since the Victory is so famous, there is also a lot of interpretation by the so-called artists. Whether this is true (as Tayler said: "I only paint what I see..."), I strongly doubt. I think we have to say goodbye to the great colour scheme of the Victory. Not because of science, but because of use and weather conditions. The war also played an important role. I have posted a few photos that roughly reflect the Victory's colour scheme. Firstly the Victory when she first sailed, ca. 1765-1770, then a picture on the high seas: HMS Victory 1793 by Swaine and what I consider to be the most realistic, as this shows a snapshot of the repairs in Portsmouth: the Victory undergoing repairs in William Lionel Wyllie's dry dock. Here I would be in favour of these being coherent, as all the layers of paint have been roughly accounted for. The renewal of the bow also shows the colour of the new wood. The artist had the good fortune here to work his way through all the colours. He therefore did not have to use his own artistic judgement. Here we can see all the colours. How you finish them is up to you. I'm sure it will be great. I'm really looking forward to your pictures ...

Cheers, Günther Ship-1


1754460821142.png 1754460948205.png

1754461088384.png
 
Hi Everyone, love this discussion as I too am build my Caldercraft Victory. From a few paintings I looked at it I too believe the gun port lids were also the yellow ochre (whatever shade that might be).

I will put paint the gunports yellow ochre and have them closed. I like the closed look, maybe just on the port side. Question, would the gunport lids hardware be black or would they too be painted yellow ochre.

Any thoughts?

Thanks Grant
Grant, here's my Vic with the lower ports closed, & scratch built brass anchors - the kit 'monkey-metal' ones are like liquorice; they're not straight & bend if you s much as look at 'em. I would say the hardware on the port lids were black.

Stuart

IMG_5684.JPG

IMG_5713.JPG
 
Hey Guys,

I always think the discussion is great. But you shouldn't forget the circumstances that played a role in the colour scheme. It was simply a question of cost. Since the Victory is so famous, there is also a lot of interpretation by the so-called artists. Whether this is true (as Tayler said: "I only paint what I see..."), I strongly doubt. I think we have to say goodbye to the great colour scheme of the Victory. Not because of science, but because of use and weather conditions. The war also played an important role. I have posted a few photos that roughly reflect the Victory's colour scheme. Firstly the Victory when she first sailed, ca. 1765-1770, then a picture on the high seas: HMS Victory 1793 by Swaine and what I consider to be the most realistic, as this shows a snapshot of the repairs in Portsmouth: the Victory undergoing repairs in William Lionel Wyllie's dry dock. Here I would be in favour of these being coherent, as all the layers of paint have been roughly accounted for. The renewal of the bow also shows the colour of the new wood. The artist had the good fortune here to work his way through all the colours. He therefore did not have to use his own artistic judgement. Here we can see all the colours. How you finish them is up to you. I'm sure it will be great. I'm really looking forward to your pictures ...

Cheers, Günther Ship-1


View attachment 536268 View attachment 536269

View attachment 536270
Great pictures - all new ones to me. Looking at the 'yellow' in these pictures, it appears to be somewhat near to that of my 'mix' for Vic.
 
These paintings are very interesting. The first 2 are remarkably consistent with my painting, previously posted, by Capt. Elliot RN in 1790. The last picture in the Dockyard, from the style of dress etc. and identity of the painter is more likely the 1923 restoration. So historically the earlier pictures are better - but it is the modeller and his/her friends who will look at it day in day out so a bit of artistic license can always be allowed.
 
These paintings are very interesting. The first 2 are remarkably consistent with my painting, previously posted, by Capt. Elliot RN in 1790. The last picture in the Dockyard, from the style of dress etc. and identity of the painter is more likely the 1923 restoration. So historically the earlier pictures are better - but it is the modeller and his/her friends who will look at it day in day out so a bit of artistic license can always be allowed.
Hey Spree,

thats right. The last picture is about 1923. I mean the colors.
Cheers Günther Ship-1
 
Grant, here's my Vic with the lower ports closed, & scratch built brass anchors - the kit 'monkey-metal' ones are like liquorice; they're not straight & bend if you s much as look at 'em. I would say the hardware on the port lids were black.

Stuart

View attachment 536281

View attachment 536282
Hey Stuart,

what great anchors. How did you make them? I would be very interested to know. How big are they and how thick? Have you done a build report on them? The Vic looks really nice ...

Cheers
Günther Ship-1
 
Back
Top