HMS Victory Occre 225 - build log


AllanKP69 said:
I have emailed with Xavier at OcCre in the past and he has kindly responded that he is not in charge of the technical department but passed on my notes to the technical department.
Click to expand...

Just as an FYI OcCre responded that they are aware of the difference of the deck (and gun port) sheer being different than the planking but thought a "few" mm would not be noticed. As there is as much as 7mm difference at their scale of 1:87, some might disagree but as Crypton posted, accuracy is not always the most important thing for everyone. Number one is have fun.

Allan
 
I have finished the frames of the gun ports. I have used the frames to make the gun ports more equal in dimensions, since I have been a bit too enthusiastic in carving some ports. I fixed it by using double strips and trimming the size carefully. I'm still doubting what will be the next phase. Either continue with the top part or start with the bottom. Let's see next week.

IMG_2187.jpg

IMG_2188.jpg

IMG_2189.jpg

IMG_2190.jpg
 
Is there to be a second layer of planking that will cover the sills as on the contemporary model below or in such a way to show the sills and sides as stops?
Thanks
Allan
Sills.PNG
 
This week, I have been adding some of the rubbing strakes (not a second planking / layer). Here I'm deviating from the manual and I decided to make them black to give it a more Victory kind of style. In my first attempt, I used a black staining paint, which resulted in way too much gloss. Therefore, I changed it with a black ink (last 2 pictures) and I'm happy with that result.
For the coming week, I'll try to finish the rubbing strakes before continuing with the bottom part of the hull.

IMG_2255.jpg

IMG_2254.jpg

IMG_2256.jpg

IMG_2257.jpg

IMG_2264.jpg

IMG_2265.jpg
 
This week I made good progress on the rubbing strakes and I finished the side that stays open. The next step will be closing the hull on the other side of the ship. I'm doing my research on how to do the planking properly. There are many styles and methods, and I'll try to do it according to the dutch style (see image). I guess, I'm a bit biased ;).

planking.png

IMG_2294.jpg

IMG_2295.jpg

IMG_2296.jpg

IMG_2297.jpg

IMG_2298.jpg
 
Hi Crypton. It looks very good.
The HMS Victory being an English ship the English method of planking will be more appropriate, but you probably will copper plate the lower hull so whatever method you choose only the shape of the hull itself will be important.
 
Herman said:
Hi Crypton. It looks very good.
The HMS Victory being an English ship the English method of planking will be more appropriate, but you probably will copper plate the lower hull so whatever method you choose only the shape of the hull itself will be important.
Click to expand...
Thank you Herman. I do not intent to copper plate the hull. I will use mahogany strips of 2x5, which came as an extension package of the kit. Since the model is not too accurate, I could rename it to “Overwinning” to match the planking style. ;)
 
Hello Crypto,

that looks very appealing, what you have conjured up there. With the planking, I would consider using the English design after all. Otherwise you might be annoyed. I'm definitely a fan of yours and will be following you. I'm very curious to see how it goes on.

Best regards
Günter Ship-1
 
You must log in or register to reply here.
Back
Top