Kingfisher 1770 1:48 POF
- Thread starter dockattner
- Start date
- Watchers 129
Just don't measure.......
we are modelers. I'm surprised he is not using a micrometer to measure.
...I see. now I understand why they think we have problems, he should use a micrometer instead of a ruler
well, I'll give him the benefit of the doubt. He is probably a beginner and only has rulers and has not purchased a micrometer yet....I see. now I understand why they think we have problems, he should use a micrometer instead of a ruler
That will certainly be a golf course....so in about 10 years....ggggg
When we last visited with one another I was taking a little break to work on springtime chores and such. And while I'm happy to report that progress has been made on my list - I have also been 'blessed' by a few rain days which allowed me to enjoy some time in the shipyard along the way.
Before I could install the upper deck beams, I needed to complete the build-out of the lower deck. There are several features to fabricate, but it's been a while since I constructed walls/rooms so that's where I turned my attention...
The first job was to fabricate the component parts, beginning with wall and door blanks:
I then completed the doors and began putting the walls together. Several styles of doors:
And some preliminary wall/door panels that will eventually find their home at the front of the ship:
I made a special effort to reduce the size of my door hardware compared to those on the platforms below:
And I then turned my attention to the rooms at the back of the ship:
To be continued...
Before I could install the upper deck beams, I needed to complete the build-out of the lower deck. There are several features to fabricate, but it's been a while since I constructed walls/rooms so that's where I turned my attention...
The first job was to fabricate the component parts, beginning with wall and door blanks:
I then completed the doors and began putting the walls together. Several styles of doors:
And some preliminary wall/door panels that will eventually find their home at the front of the ship:
I made a special effort to reduce the size of my door hardware compared to those on the platforms below:
And I then turned my attention to the rooms at the back of the ship:
To be continued...
And now loosely fit on the ship itself...forward:
And aft:
Thanks for stopping by! We're headed out of town for a wedding - and then back to work on my springtime chores. Hoping to report again in a few weeks...
And aft:
Thanks for stopping by! We're headed out of town for a wedding - and then back to work on my springtime chores. Hoping to report again in a few weeks...
Great work, no surprises here, as usual. Enjoy the wedding and springtime chores break!
Did you account for the highs of the wall counting the deck planks? I am sure you did, mon ami.
Did you account for the highs of the wall counting the deck planks? I am sure you did, mon ami.
Wonderful work to your usual very high standard Paul. I see an Ultimation Slicer in that first photo. A really useful tool especially for quick set up and consistent cuts. Enjoy the wedding.
Good morning Paul. It is always a joy to view your work. I will pray for a few more rainy days for you….
. We need some rain down here, it has been a very dry winter so far which is never good for Cape Town. Cheers Grant- Joined
- Oct 23, 2018
- Messages
- 600
- Points
- 353
I simply love it.
- Joined
- Jul 27, 2021
- Messages
- 303
- Points
- 323
Super! Have fun!
Dirk
Dirk
Wow Paul that looks fantastic, great work.
Beautiful Paul as expected
Could you please describe how you got the clean symmetrical nail marks (not trenalls) in the walls
- Joined
- Aug 8, 2019
- Messages
- 4,674
- Points
- 688
practise
He did a lot, day after day.