Thomas... I think I found the router bits you pictured. They are Proxxon, correct ?
Thanks
Daniel
Thanks
Daniel
-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
La Belle - Caf Model 1:48 by Thomas Marocke [COMPLETED BUILD]
- Thread starter Thomas Marocke
- Start date
- Watchers 62
Hi Daniel!
The scrappers are from "Shicheng" and were in the kits of the "42 ft gunboat" and the "La Requin". I don't know if the company still produces them today.
The term "Scrappers" in German is "Zieheisen". The term is sometimes translated differently by the translator.
The Router bits are from Proxxon. But also Dremel and other manufactorers offer them. These router bits are very rarely used by me and need a stationary, solid drive machine, good workpiece guidance and careful use.
Best regards
Thomas
The scrappers are from "Shicheng" and were in the kits of the "42 ft gunboat" and the "La Requin". I don't know if the company still produces them today.
The term "Scrappers" in German is "Zieheisen". The term is sometimes translated differently by the translator.
The Router bits are from Proxxon. But also Dremel and other manufactorers offer them. These router bits are very rarely used by me and need a stationary, solid drive machine, good workpiece guidance and careful use.
Best regards
Thomas
Hallo Thomas,
your work on the the rails is very accurate - real fine and accurate work -
Your La Belle is getting a real beauty and your model is completely reflecting her name
your work on the the rails is very accurate - real fine and accurate work -
Your La Belle is getting a real beauty and your model is completely reflecting her name
The second decorative strips are attached and some cutouts for the supplied decorative parts.
Two small slips happened during the milling process. They are visible in the magnification but hardly noticable with the eye on the model.
All a nice weekend
Thomas
There are no milling defects in the following parts.
They only need to be trimmed.
Making the cutouts for the railing and the nameplate.
The railing is finished. . .
. . . and the decorations attached.
Best regards
Thomas
They only need to be trimmed.
Making the cutouts for the railing and the nameplate.
The railing is finished. . .
. . . and the decorations attached.
Best regards
Thomas
The decorations are ready.
Small milling cutter errors could be eliminated. In the magnifications, you can see the travel paths of the cutter, but not with the eyes. The still to be applied clear varnish will make the "carvings" additionally a little softer.
Best regards
Thomas
Small milling cutter errors could be eliminated. In the magnifications, you can see the travel paths of the cutter, but not with the eyes. The still to be applied clear varnish will make the "carvings" additionally a little softer.
Best regards
Thomas
Last edited:
The La Belle was allowed out of the workshop into the daylight. The decorations are cleaned with a fresh toothbrush and painted once with a fine brush with nitro primer. After the final painting on the finished model, the ship's name can also be painted on. On raw wood, the paint sinks in or can run.
The constant touching makes the light wood greasy or dirty, hence the quick primer. In addition, the surface of the wood becomes a little harder and does not get scratches so quickly. Also glue residues can be seen under the paint as milky spots and can be eliminated at the latest now.
Now also the beautiful wood colours look much better than in the workshop.
Best regards
Thomas
I like your model (and way of working) very much - she is getting a really fine and accurate build model 
The arches for the railing were carefully milled out step by step.
Here are two attempts with different shapes. The one corresponding to the construction plan is cut off piece by piece as needed.
Best regards
Thomas
Here are two attempts with different shapes. The one corresponding to the construction plan is cut off piece by piece as needed.
Best regards
Thomas
The fore topsail sheet bitts.
Round and square files for making the cutouts and contours.
Best regards
Thomas
Round and square files for making the cutouts and contours.
Best regards
Thomas
In order to be able to put on the next decks, the rooms underneath had to be painted first.
A brush was bent to apply the primer in all corners.
Every modeler has different preference like oiling, varnishing etc. I use nitro varnish. On the two upper pictures the finished primer with the brush. It still looks very blotchy. Now an intermediate step was done with sandpaper (duration about half an hour).
Then the cover for the airbrush painting in the garden.
Beautiful weather invited to paint.
And the finished paint job in matte lacquer. The wood gets a warm tone and is protected.
On this occasion, the door and the ship's boat was also painted.
Best regards
Thomas
A brush was bent to apply the primer in all corners.
Every modeler has different preference like oiling, varnishing etc. I use nitro varnish. On the two upper pictures the finished primer with the brush. It still looks very blotchy. Now an intermediate step was done with sandpaper (duration about half an hour).
Then the cover for the airbrush painting in the garden.
Beautiful weather invited to paint.
And the finished paint job in matte lacquer. The wood gets a warm tone and is protected.
On this occasion, the door and the ship's boat was also painted.
Best regards
Thomas
And ware a mask especially with ebony if you use it It is poisonous. Aloha, MikeJ
Wow, thats a beautiful looking model.
Thanks for the comments and likes!!!
The retaining rings for the stove and the stove itself could finally be permanently mounted.
And because epoxy resin was just mixed, the ceiling beams were also permantly glued with it.
Best regards
Thomas
The retaining rings for the stove and the stove itself could finally be permanently mounted.
And because epoxy resin was just mixed, the ceiling beams were also permantly glued with it.
Best regards
Thomas