• Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.

Modelship Dockyard - New Kit [Modelship Dockyard] PoF H.M.S. Enterprize 1774, the 1/48 version!

Gentlemen, for your consideration, another instruction mystery regarding vertical stantions[ C1-9 that fit in/around corners of upper well.
Step #67 shows them inside well, #82 outside. By #84 we're back inside.
This is why with some steps you need to jump ahead and see the interplay as to future instillations so you're not ripping stuff out.
Since I now have built chain pump housings I realized C1-9 final placement is coordinated with final mounting of the chain pumps. Their handles pass through fittings on C1-9 and further on and all needs coordination to insure handles run straight, end to end. No detailed explanation but once you get to #84,#85 it gets obvious and several parts come into play.
Lastly, yo need to make very slight adjustments to C1-9 mortices since, once again they're captured by two levels of beams.
Simply make sure plenty of dry fitting gets you there.

Tim
 
TRS7139 said:
Gentlemen, for your consideration, another instruction mystery regarding vertical stantions[ C1-9 that fit in/around corners of upper well.
Step #67 shows them inside well, #82 outside. By #84 we're back inside.
This is why with some steps you need to jump ahead and see the interplay as to future instillations so you're not ripping stuff out.
Since I now have built chain pump housings I realized C1-9 final placement is coordinated with final mounting of the chain pumps. Their handles pass through fittings on C1-9 and further on and all needs coordination to insure handles run straight, end to end. No detailed explanation but once you get to #84,#85 it gets obvious and several parts come into play.
Lastly, yo need to make very slight adjustments to C1-9 mortices since, once again they're captured by two levels of beams.
Simply make sure plenty of dry fitting gets you there.

Tim
Click to expand...
Thanks for the heads up Tim !
 
TRS7139 said:
Gentlemen, for your consideration, another instruction mystery regarding vertical stantions[ C1-9 that fit in/around corners of upper well.
Step #67 shows them inside well, #82 outside. By #84 we're back inside.
This is why with some steps you need to jump ahead and see the interplay as to future instillations so you're not ripping stuff out.
Since I now have built chain pump housings I realized C1-9 final placement is coordinated with final mounting of the chain pumps. Their handles pass through fittings on C1-9 and further on and all needs coordination to insure handles run straight, end to end. No detailed explanation but once you get to #84,#85 it gets obvious and several parts come into play.
Lastly, yo need to make very slight adjustments to C1-9 mortices since, once again they're captured by two levels of beams.
Simply make sure plenty of dry fitting gets you there.

Tim
Click to expand...
thanks
 
You must log in or register to reply here.
Back
Top