POF Hayling 1760

[Uwek]

Your hull is coming out nicely after sanding - so good work in the preparation of the frames

 

[NOVICHOK]

Thanks.there was a lot of dust and a lot of obscene expressions.I sewed up the transom with slats and installed the first boards of the outer skin.

 

[NOVICHOK]

Good evening.I started installing the outer skin and immediately ambushed.if the rail is exposed along the tops of the ribs, then a gap of 2 millimeters appears.after viewing the photos of the test build, I realized why the gap appeared.the guys from the company had a black rail on board there.then they removed it, but they forgot to recompile the skin.I inserted my rail.it's a little wider but quite a bit.I hope this will end the problems with the cladding.

 

[NOVICHOK]

Good evening.the process of covering the ribs with sheathing is in full swing.

 

[shota70]

Good evening.the process of covering the ribs with sheathing is in full swing.

View attachment 371566

great progress, it is looks beautiful

 

[NOVICHOK]

Hi.I continue my story.installed a barkhout.these strips were difficult for me.I painted them before installing.but since it stuck badly, I had to polish them.I'll have to paint it one more time.and I chewed off all the protrusions of the ribs except the front ones.That's it for now.

 

[NOVICHOK]

Good night.something I can't sleep and I decided to work out with the boat.installed the handrails of the hull.in the stern, I decided to cut them into the aft part.I don't know what it's called.so that he would go to the very end.

 

[NOVICHOK]

Hi.I installed all the curves on the railing.

 

[NOVICHOK]

Good evening.the question is, where do these two details go?

 

[NOVICHOK]

Hello everyone.I started working on the stern.I sealed the central window and part of the upper panes.as in this drawing.

 

[NOVICHOK]

Good evening.there was such a question.the case is moving to the mast and rigging.there is a desire to order ropes.but I do not know what size to order.does anyone know what ropes I'll need?

 

[NOVICHOK]

Good afternoon.I started preparing the hull for painting.I glue it with yellow tape.

 

[NOVICHOK]

Hi.I painted the case.

 

[NOVICHOK]

Good evening.installed a beam crane.they had to be pushed forward.otherwise, it was necessary to grind the props.

 

[Uwek]

WOW - you are a very fast builder - very good progress

 

[NOVICHOK]

Hi.thank you for your kind words.I ordered and received pulleys, as well as beads for the mast.pulleys installed in beams

 

[NOVICHOK]

Assembled the steering wheel.but I'm stupid how to assemble the loops.as always, there is zero information in the instructions

 

[NOVICHOK]

Вот как я выясню, как делать петли из такого отвратительного рисунка?

 

[NOVICHOK]

Hi.sad news.there is no friendship with steering wheel loops.they break down and fall apart.apparently I'm stupid and ru and I have curves for such a small job.I will think something , sculpt my own from the wreckage (((

 

[NOVICHOK]

Hi.a new question.on the assembly plan, the threads are indicated by numbers and letters B0,4.0,6.0,8.10.could it be the thickness in millimeters? For example 0,4mm0,6mm or 1mm