Purchased shortly ago / sthg new in your workshop -> present it here

[Bryian]

Ewe,
they were a special order for me. I was most impressed with the quality of these cast brass anchors, as they are far superior to anything else available.

 

[PT-2]

Ewe,
they were a special order for me. I was most impressed with the quality of these cast brass anchors, as they are far superior to anything else available.

There we are . . . money talks!!! Their willingness to take on a special casting project is commendable as many businesses will only remain within their own defined business plan and not spread themselves out. With enough money anything is possible in principle. PT-2

 

[Bryian]

PT-2 your comment is incorrect.
They are anchors from CAF models used for their HMS Enterprise model. They are the same size required for my HMS Alfred.

 

[PT-2]

PT-2 your comment is incorrect.
They are anchors from CAF models used for their HMS Enterprise model. They are the same size required for my HMS Alfred.

That's ok but I believe that my principle conjecture is universally right for a number of things. Now I have learned more about such accessories that I did not know about before. Thanks, PT-2

 

[Uwek]

Just received today, the new kit from CAF - The Le Coureur - 1776 POF kit in scale 1:48



I will make a detailed Kit Review asap and show it here in ShipsOfScale

 

[PT-2]

Just received today, the new kit from CAF - The Le Coureur - 1776 POF kit in scale 1:48

View attachment 179471

I will make a detailed Kit Review asap and show it here in ShipsOfScale

Let the games begin!!! PT-2

 

[Kurt Konrath]

Ok I got a nice item to go with my DSLR camera.

I got this off eBay for about $55 Us. Came in box from Amazon!

It’s a LED light for close up photography that mounts on end of lens and provides bright even white lighting.

It comes with set of 6 adapter mount rings of most popular lens sizes.


Camera with light mounted and on

Box with product information
Back side of light. Notice half circle for adapter ring to slide into

Front view with 60 LEDs


Adapter mounted to end of lens

 

[PT-2]

Ok I got a nice item to go with my DSLR camera.

I got this off eBay for about $55 Us. Came in box from Amazon!

It’s a LED light for close up photography that mounts on end of lens and provides bright even white lighting.

It comes with set of 6 adapter mount rings of most popular lens sizes.

View attachment 179531
Camera with light mounted and on
View attachment 179532
Box with product informationView attachment 179533
Back side of light. Notice half circle for adapter ring to slide into
View attachment 179534
Front view with 60 LEDs
View attachment 179535

Adapter mounted to end of lens

It looks very convenient for those close or cropped type of photos. Now all that I need it the money to by a real camera and lenses in place of my iPhone. PT-2

 

[paulv1958]

it works really well with the EF L series 100 Macro, but the lens is not cheap( but well worth it).

 

[Pathfinder65]

Just received today, the new kit from CAF - The Le Coureur - 1776 POF kit in scale 1:48

View attachment 179471

I will make a detailed Kit Review asap and show it here in ShipsOfScale

Uwe,

The rotary cutter looks interesting. What will,you use it for?

Jan

 

[Uwek]

Uwe,

The rotary cutter looks interesting. What will,you use it for?

Jan

I have to check the possibilities - it was an additional gift inside the CAF delivery

 

[Pathfinder65]

Kolderstok Plank Bender.




I’ve read the many comments on this plank bender. Several forum members have recommended that I should have one.

Doing a little research I found that as is, the bender uses 220/240v and heats to 30 watts. A note to Hans at Kolderstok confirmed that given my countries electrical circuits are 120v, the bender as configured would never reach it’s designed wattage. Hans with great efficiency worked out a compromise.

A 120v, 30w soldering iron from Walmart fitted out with the components from his bender and ”viola” we had a working tool.


The soldering iron.



The components.



The final product works very well. I’ve tested it on basswood, linden, mahogany, cherry and walnut. All those woods (after a quick soak) bent to the shape of the head. I’ve not tried the other tip to “iron” a plank onto a hull.

Jan

 

[mstritzl]

The rotary cutter looks interesting. What will,you use it for?

I mainly use this - or better said my old one - to cut cloth (for sails) and paper ...

 

[PT-2]

I mainly use this - or better said my old one - to cut cloth (for sails) and paper ...

It seems that as we go on acquiring tool after tool that the need for a larger tool box (shop area) becomes inevitable as I can only stack things so high. . . . PT-2

 

[Uwek]

I got my two new sets of needle-files from company PFERD Corradi - this time the grades 0 and 1 (grade 2 I had already)
Highly recommended files and high quality - I realized the difference compared to "cheap" one´s by making the sanding works for the Le Coureur frames very much, so I decided to order these








Hieb 0 (grade 0) which is more "rough" lays under the Hieb 1 - Hieb 2 (grade 2) is finer

 

[Olivers Historic Shipyard]

A must have !

 

[JohnA]

A must have !

You can really see the quality on these files.

 

[Kurt Konrath]

Are these diamond files or what category, I was having hard time finding the sets on line.

What part numbers for all three sets if you know and maybe a source online.

Kurt

 

[PT-2]

Are these diamond files or what category, I was having hard time finding the sets on line.

What part numbers for all three sets if you know and maybe a source online.

Kurt

They definitely look better than the more limited set that I have. I would like to know how to contact the course and cost. PT-2

 

[JohnA]

They definitely look better than the more limited set that I have. I would like to know how to contact the course and cost. PT-2

You can buy them from this site:
Look for parts 266/20 and 266/16

Heste CORRADI nålefilsæt

Køb Pferde CORRADI nålefilsæt billigt

www.toolteam24.com