Niccccccccccccccccceee!
Purchased shortly ago / sthg new in your workshop -> present it here
- Thread starter Uwek
- Start date
- Watchers 184
-
- Tags
- just purchased
That's a great bunch of lumber mate
Now there is some fun times in that timber! 
Nice I had to work today so missed the postman but seems my books are here from Ancre. the nice thing is they have to be signed for so wife supposed to stay home tomorrow to get them otherwise will have to wait til monday and miss a day and half of my days off to get them hehe
only had to work a mere 16 hrs today so couldnt stay home for a bit
only had to work a mere 16 hrs today so couldnt stay home for a bit
I have received my Wen oscilating spindle sander
Nice addition to a scratch model builder! One day, oscillating spindle sander will be in my shop...I hope! 
I Posted this in another thread yesterday but take a look at the orange discs that surround the sanding drum. You will see they don't sit flush with the deck I did have some issues with hang ups in the lip I remade those discs and ground them to fit flush with the deck. Doing this will also prevent sanding a bevel on the parts as they fall below the deck and onto that plate. other then that issue the sander is fantastic. It made super fast work of my Blandford frames and the dust collection system works flawlessly with a shop or home vacuum.
Got this as and early Xmas pressie,used it a few times so far very happ the only thing I don't like is that it is very noisy
Hi, I have this tool and just love it it is a worhorse for me, I must have an earlier model, WHERE DID YOU GET THE MITER GAUGE AND IT LOOKS LIKE IT HAS A FENCE ALSO, PLEASE WHERE DID YOU GET THEM I TRIED THE DREMEL SITE BUT NO LUCK, APPRECIATE ANY HELP YOU CAN GIVE ME. THANKS Don
I can fully agree with the tip by Jim..... I am using some thicker rubber material, which is usually 1 or even 2cm thick, available in hardware stores, f.e as a base for washing machines. Most of my machines are on top of such rubber. you can buy by sqm and cut with a knife to the needed size. Working very good
https://www.schutzmatten.at/arbeitsplatzmatten/antivibrationsmatten.html
They are produced out of recycled car tires
Thanks mate good idea I will use your idea
Hi,The mitre gauge came with the saw there is no fence the mitre gauge can fit on either side of the blade and slides in slots,I found an old reference to it here
messageboard.dremel.com/Topic9081.aspx
hope this helps
Dremel Mitre Gauge
https://www.rc-airplanes-simplified.com/power-coping-saw.html
There is a mention of how to order the mitre gauge at the bottom of this article
. You have to contact Dremel since it’s not available on any website.
Thanks guys big help have been trying to find this for a long time. Don
Hi All, received this today, I purchased it from an online auction site. The item is brand new.
It is a light 'table' little larger than A4 in size, the only down side is the sensitivity of the On/Off touch switch, tooo sensitive. I still have to test it with Blueprint paper which is much thicker than 80gsm copy paper. Ideal for tracing various things.
Power off
Power on, screen lights with dark mesh.
A blank sheet of paper over above picture.
The blue color is not from the camera but the two sheets of paper.
It is a light 'table' little larger than A4 in size, the only down side is the sensitivity of the On/Off touch switch, tooo sensitive. I still have to test it with Blueprint paper which is much thicker than 80gsm copy paper. Ideal for tracing various things.
Power off
Power on, screen lights with dark mesh.
A blank sheet of paper over above picture.
The blue color is not from the camera but the two sheets of paper.
hmm i think i have one of these with my old film development equipment, must look.
Hmmm I have a light box never thought of using it like this
Nice gadget...