• Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
  • SUBSCRIBE TO SHIPS IN SCALE TODAY!

    The beloved Ships in Scale Magazine is back and charting a new course for 2026!
    Discover new skills, new techniques, and new inspirations in every issue.

    NOTE THAT OUR NEXT ISSUE WILL BE MARCH/APRIL 2026

Royal Louis - Mamoli

I’m now moving on to second planking the lower hull using 4x1mm walnut strip. I once tried using the supposed correct method of planking but without a great deal of success so I’m not going to start like that again on such a difficult hull. I’ll just concentrate on getting the planks down flat and neat with only one eye on a sort of correct flow so if pointy bits offend your eye look away now. I use both white glue and cyno for attaching the planks. I have already sanded the edges of the planks to get a nice clean fit, also to help a clean looking fit after I’ve laid each plank and whilst the glue is still moist I lightly sand the area, this removes any surface glue and at the same time fills any gaps with sawdust, especially helpful where I’ve put in fillets. I found that the way that I introduced the rabbet line has worked very well.


119.jpg


120.jpg


121.jpg


122.jpg
 
Vfordyce said:
Have you tried stealers in the past? They didn’t seem to be so hard to make.
Click to expand...
Agreed. Plan the stealers out, identifying pinch points or expansion point areas, and make them in pairs, port and starboard. Draw pencil lines on the loose planks you about to tape and attach, and test fit. Once you get used to the thinking involved in predicting where to install stealers and drop planks, it does get easier. No pointy planks required.
 
Last edited:
Ken said:
I’m now moving on to second planking the lower hull using 4x1mm walnut strip. I once tried using the supposed correct method of planking but without a great deal of success so I’m not going to start like that again on such a difficult hull. I’ll just concentrate on getting the planks down flat and neat with only one eye on a sort of correct flow so if pointy bits offend your eye look away now. I use both white glue and cyno for attaching the planks. I have already sanded the edges of the planks to get a nice clean fit, also to help a clean looking fit after I’ve laid each plank and whilst the glue is still moist I lightly sand the area, this removes any surface glue and at the same time fills any gaps with sawdust, especially helpful where I’ve put in fillets. I found that the way that I introduced the rabbet line has worked very well.


View attachment 581852


View attachment 581853


View attachment 581854


View attachment 581855
Click to expand...
Lovely Ken. Very neat planking. Cheers Grant
 
  • Like
Reactions: Ken
DARIVS ARCHITECTVS said:
Agreed. Plan the stealers out, identifying pinch points or expansion point areas, and make them in pairs, port and starboard. Draw pencil lines on the loose planks you about to tape and attach, and test fit. Once you get used to the thinking involved in predicting where to install stealers and drop planks, it does get easier. No pointy planks required.
Click to expand...
Hi Kurt. I totally understand what you’re saying and seeing your work I can see why you would like to see all hulls done that way. This will most likely be my last build, I know what I can achieve doing it a simple way, this will be a difficult enough hull to do as it is so now is not the time for me to push the boat out. I’m afraid that you’ll have to turn a blind eye to it. Ken
 
Ken said:
Hi Kurt. I totally understand what you’re saying and seeing your work I can see why you would like to see all hulls done that way. This will most likely be my last build, I know what I can achieve doing it a simple way, this will be a difficult enough hull to do as it is so now is not the time for me to push the boat out. I’m afraid that you’ll have to turn a blind eye to it. Ken
Click to expand...
I understand. We have to work within our limits. Thanks Ken!
 
  • Like
Reactions: Ken
Good morning, as you can see it's a nice sunny day, hopefully were coming out of winter and into some better weather. This is just a short pictorial update showing my humble effort at planking. I'm happy so far, the seams are tight and there are no sprung planks.


123.jpg



124.jpg


125.jpg
 
Ken said:
Good morning, as you can see it's a nice sunny day, hopefully were coming out of winter and into some better weather. This is just a short pictorial update showing my humble effort at planking. I'm happy so far, the seams are tight and there are no sprung planks.


View attachment 582289



View attachment 582290


View attachment 582291
Click to expand...
Hi Ken,

very nice progress.

Unfortunately, now that the weather has turned and we have some sunny weather, I have received new orders from my commander - garden! Hopefully, I can keep my build going, and do all the other "stuff". If it stays nice we will try to have a ride up your way and drop in to say hello.

Dom
 
I’m making fairly rapid progress on the build. I’ve finished the second planking except for covering the stern post it does need a good sanding before I decide on a finish, stain or paint, not sure which yet. I did make it difficult for myself, I soon realized that I wasn’t going to have enough planks, I was about eight short, I’d used the hull planks to sheath the prow and keel by mistake. .5x3mm were supplied for that, I didn’t have any 1mm walnut in my stash so I glued .5x3mm strips together to make them 1mm thick and I used them towards the bow where I would have needed to taper the 4mm planks anyway. It worked okay, I think that I just about got away with it, I must pay more attention.


126.jpg


127.jpg128.jpg


129.jpg


130.jpg


131.jpg
 
You must log in or register to reply here.
Back
Top