Excellent progress, Oleg. чудова робота, колега!
Rudder. Repeat again - stem, sternpost and rudder should have taper. For the stem I didn't do it, because the figurehead that is in the kit has a slot for untapered stem. If I have tapered it, I would have had to fill the gaps or make a new lion. So I kept the stem as it was.
For the sternpost and rudder, they are given in 7 mm thickness. As per drawings, this is their thickness on the bottom, but they should become wider on top, up to 9 or 10 or 11 mm I don't remember exactly. So you would need to make these parts form scratch, from a thicker billet. Me I just tapered a little the rudder blade to make it more pleasant to the eye.
For the sternpost and rudder, they are given in 7 mm thickness. As per drawings, this is their thickness on the bottom, but they should become wider on top, up to 9 or 10 or 11 mm I don't remember exactly. So you would need to make these parts form scratch, from a thicker billet. Me I just tapered a little the rudder blade to make it more pleasant to the eye.
Before putting the upper decks, I mounted the cannons that are right below them. These cannons are unrigged. I will rig only those that are visible (12 on the upper deck and 8 on the quarter deck).
I did a simple stamp to band those fixing plates
I did a simple stamp to band those fixing plates
Great work, Oleg, and many thanks for re-posting missing images\posts!
What Jim said already I want also to repeat - Many thanks for re-posting the images - highly appreciated.
And now I remember, what I also commented - and want to do once more:
Your planking work on the hull is looking extremely good
and now I remember our talk about the hinges of the rudder ....... we recognized, by comparing the different ships, that there were both ways of installation possible
Your guns have a very good appearance - how you treated the metal parts to get this regular color?
And now I remember, what I also commented - and want to do once more:
Your planking work on the hull is looking extremely good
and now I remember our talk about the hinges of the rudder ....... we recognized, by comparing the different ships, that there were both ways of installation possible
Your guns have a very good appearance - how you treated the metal parts to get this regular color?
Thanks a lot Jim and Uwe! For the guns, well nothing special, white spirit, then BlackenIt, rinse with water and dry. Actually on the opposite, I still can't get the good quality of blackening, whatever technics I try, it chips off very easilly on the small parts. On the cannons I'm lucky - it stays, but for some reason sometimes they arrive mat, sometimes glossy...
Try Jax blackeners ,they are very good
Patinas
Canada's best source for Quality Tools, Equipment and Supplies for Jewellers and the Jewellery Industry. Over 17,000 products available from our 16,000 SF warehouse in Toronto. In-stock orders placed before 3:30pm shipped the same day. Can't find what you are looking for? Call our highly...
www.gessweincanada.com
For US customers order from this link
jaxchemical.com
Metal Blackener Solutions - JAX Chemical Company
Fast acting, water-based metal blackener solutions easily darken aluminum, pewter, brass, bronze, copper, silver, iron, steel or nickel.
jaxchemical.com
Awesome, Zoly! Many thanks for sharing! Do you have to dilute with water this solution or you use it straight from the bottle?
You c
You can dilute ,just will work slower
Hi guys, a small offtopic question. How to understand scale on the archive drawings? I have a drawing of british ship, that has frames stations named 1,4,7,10,13 and so on up to 30. There is no other indication about scale or dimensions. Are those jards? They are numbered from the midsection, and ship keel length is about 142 feet. Looks close...
